Instruction manual

53
Easy Setup
2
WHEN USING FOR THE FIRST TIME
2.2.5 Model setting
Make the inverter model setting manually.
No. Name Function and description
A
St. No. Set the inverter station number from 0 to 31.
B
Comment A field for comments.
C
Inverter Select the connected inverter model.
D
Capacity Select the connected inverter capacity.
E
Option Connector 1 to 3,
Terminal Block 3
Select the options connected to the option connectors of the inverter. (Option Connector 1 to 3 is
available for FR-A700, A701 series.)
F
Next> Proceeds to "Inverter Selection" (Refer to page 54).
G
<Back Returns to "Inverter Setting Method" (Refer to page 51).
H
Cancel Closes Easy Setup with the invalid setting.
I
Help Displays Help window. (Refer to page 160)
REMARKS
• "Model Setting" is also available from [Model Setting] in the [Tool] menu.
• Use Option Connector 2 on the Model Setting window to select a network option connected to an F700-NA or EC, which is
equipped with only one option connector. No network option is selectable in Option connector 1.
The connected network option will be automatically set to Option Connector 2 when the Automatic Recognition is performed for
an F700-NA or EC, which is equipped with only one option connector. The connected network option will be also automatically
set in Option Connector 2 when a MEL file set to an F700-NA or EC is read.
G F
E
HI
A
C
B
D