Instruction manual

47
Easy Setup
2
WHEN USING FOR THE FIRST TIME
2.2 Easy Setup
Setting from system setting to parameter setting is easily performed with Easy Setup. Even without FR Configurator
knowledge, without regard to the parameter number, system setting and basic parameter setting is easily performed.
REMARKS
When is clicked in each setting window, the setting input so far becomes invalid, and the window returns to "Startup".
(Communication setting is saved even when is clicked.)
Automatic
Easy Setup
Automatic? Manual?
Manual
Main frame
System Property
Communication Setting
Finished?
Parameter setting?
Input motor information.
Motor Setting
Select the control method.
Control Method
Start Command and Frequency (Speed) Setting Method
Automatic Detection
Model Setting
Inverter Setting Method
Parameter List
(Confirmation of parameter setting)
Set System Property.
Input system name and comment.
Select inverter setting method in Easy Setup. Select
between automatic detection or manual model
setting.
When "Perform Automatic Recognition of the
Connected Inverter" is selected in "Inverter Setting
Method" window, then connected inverter is
automatically detected.
If "Perform system setting manually" is selected, then
set station number, inverter model, capacity and plug-
in option manually.
The configured parameter setting based on the
setting input is displayed in a list.
Inverter Selection
Select a station number,
and click
Fix the system setting configured so far.
After fixing the system setting, parameter setting is
available. Choose an inverter (station number) for
parameter setting, and click .
Click to close Easy Setup, and proceeds to
the Main frame window.
Make communication setting between inverter and
personal computer.
Select the start command input method and
frequency (speed) setting input method.