Instruction manual

42
Explanation of Window
(2) [View] menu and Main frame
Each function screen of FR Configurator is displayed from [View] menu. [View] menu is divided into three segments. Function
screens in Monitor area are on top, screens in System area are in the middle, and screens in Navigation area are on the
bottom.
A check mark appears on the left of the item inside the [V
iew] menu for each screen displayed in each area. One function
each from Monitor area, System area and Navigation area can be displayed. Check on the [Test Operation] under [Navigation]
menu to display the command sending part of "Test Operation".
To close a currently displayed function, click and uncheck the name of the function. To hide the Navigation area itself, click
and uncheck the item of the System View under [Navigation] menu.
When a function in Monitor area is performing monitoring, all functions in Monitor area are unavailable. Stop the monitoring,
and then select a menu.
REMARKS
• Depending on connected inverter, with or without of Model Setting, or ONLINE/OFFLINE condition, some functions are
unavailable. If an item in menu is displayed in gray, the item is unavailable.
• When functions in both Monitor area and System area are checked, click and uncheck one of them will maximize the window
size of another.
Screen in Monitor area
Screen in System View
Screen in System area
Screen in Navigation area
Switches display/hide of
command sending part of
"Test Operation"
Displaying "System Setting" at
System View in Navigation area
Switches display of "Test Operation"
Displaying "Graph" in
Monitor area
Displaying "Parameter List"
in System area