Instruction manual

Start and Close

1.6 Start and Close

1.6.1 Starting FR Configurator

There are the following ways to start FR Configurator.

(1) Start from Start menu

Click [Start] on the Taskbar of Windows, and point to [All Programs], [MELSOFT Application], [FR Configurator], [SW3 (700

Series)], and click [FR Configurator SW3] to start FR Configurator.

(2) Start from system file (*.me3)

Double-click (or press Enter key) a desired system file (*.me3) to start FR Configurator with reading the setting of the system

file. [Startup] window is not displayed. (Refer to page 93 for the system file (*.me3))

(3) Start from command line

Specify an executable file of FR Configurator (invsup3_e.exe) to [Run...] window in the [Start] menu of Windows, to start FR

Configurator.

Specify the system file (*.me3) after the executable file, and the setting of the system file (*.me3) is read at the starting up of

the software. "Startup" window is not displayed at starting up of the software when the system file (*.me3) is specified.

(4) Start from Windows Explorer

Select the executable file of FR Configurator (invsup3_e.exe) by using Windows Explorer, and double-click (or type Enter key)

to start FR Configurator.

Specify the system file (*.me3)