Instruction manual

19
1
OUTLINE
Connection and Parameter Setting
REMARKS
• Refer to the following when fabricating the cable on the user side.
Commercially available product example (as of February 2012)
* Do not use pins No. 2, 8 of the 10BASE-T cable.
• Distributor is necessary when connecting multiple inverters.
Refer to the inverter manual for connecting multiple inverters.
Note
• Pins No. 2 and 8 provide power to the operation panel or parameter unit. Do not use these pins for RS-485
communication. (Refer to the inverter Instruction Manual for details.)
• Do not connect the PU connector to the computer's LAN board, FAX modem socket or telephone modular connector.
The product could be damaged due to differences in electrical specifications.
Product Name Type Manufacturer
10BASE-T cable SGLPEV-T 0.5mm x 4P* Mitsubishi Cable Industries, Ltd.
RJ-45 connector 5-554720-3 Tyco Electronics