Instruction manual
INTRODUCTION
Thank you for choosing this Mitsubishi Inverter Setup Software.
This instruction manual gives handling information and precautions for the use of this software. Incorrect handling might
cause an unexpected fault. Before using the software, please read this manual carefully to use the software to its optimum
performance.
Please forward this manual to the end user.
When reading this manual, note the following.
• This manual is written on the basis that Windows
XP (English version) is the operating system.
• Drive D is described as the CD-ROM drive and Drive C as the hard disk drive.
Trademarks
• Microsoft Windows and Excel are registered trademarks or trademarks of Microsoft Corporation in the United States and/or
other countries.
(1) The formal name of Windows
2000 is Microsoft
Windows
2000 operating system.
(2) The formal name of Windows
XP is Microsoft
Windows
XP operating system.
(3) The formal name of Windows Vista
is Microsoft
Windows Vista
operating system.
(4) The formal name of Windows
7 is Microsoft
Windows
7 operating system.
• "FR Configurator" is a registered trademark of Mitsubishi Electric Corporation.
The copyright and other rights of this software all belong to Mitsubishi Electric Corporation.
• No part of this manual may be copied or reproduced without the permission of Mitsubishi Electric Corporation.
• Other company and product names herein are the trademarks and registered trademarks of their respective owners.
• SPREAD
Copyright 2004 FarPoint Technologies, Inc..
• Visual Combo
Copyright 2006 MCOR Co., Ltd
For Maximum Safety
• This product has not been designed or manufactured for the use with any equipment or system operated under life-
threatening conditions.
• Please contact our sales office when you are considering using this product in special applications such as passenger
mobile, medical, aerospace, nuclear, power or undersea relay equipment or system.
• Although this product was manufactured under conditions of strict quality control, you are strongly advised to install safety
devices to prevent serious accidents when it is used in facilities where breakdowns of the product are likely to cause a
serious accident.