Instruction manual

171
Error Display on a Dialog
5
TROUBLE INDICATION
5.2 Error Display on a Dialog
When using or closing FR Configurator, or at fault occurrence, a message dialog appears for providing information or for
warning.
There are four types of message dialog.
There are the following messages for warnings and cautions.
Icon Error Type
Mainly Used
Button
Description
Warning
Appears if an attempted operation may have an affect on the
human body, or may cause an inverter failure.
Caution Appears when a confirmation is required before the operation.
Information Appears to provide information about the operation.
Inquiry Appears when reply to the inquiry message is variable
Display Description
Appears when FR Configurator has been already started.
Appears when the display resolution is less than 800 x 600.
Appears when the startup of the communication control task or
the configuration of common memory is failed. Uninstall the
software once, and set up again.
Appears when starting up FR Configurator even though reading
of the required files has failed.
Appears when reading of the required files for the startup has
failed, and startup of FR Configurator is unavailable.
Appears when writing to the setting file is invalid (the file
attribute is read-only or write-disabled.)