Instruction manual

169
Error Code
5
TROUBLE INDICATION
0x80111001
0x80111002
0x80111003
0x80111004
0x80111005
0x80111101
0x80111102
0x80111103
0x80111104
0x80111105
0x80111106
0x80111107
0x801111FF
Failed to make
communication with the
inverter during the time set
with Time Out.
Electromagnetic interference, etc. are
propagated when receiving GOT software.
Set a larger value for Time Out setting of
the software and try again.
0x80112001
Wrong communication port
is assigned.
Serial line open error Check for the communication port setting.
0x80112002
An unexpected error
occurred to S/W.
Serial line closed error Try again.
0x80112003
An unexpected error
occurred to S/W.
Serial line setting error Try again.
0x80112004
An unexpected error
occurred to S/W.
Serial line baud rate error Try again.
0x80112005
Failed to make
communication with the
inverter during the time set
with Time Out.
Occurred before starting FR Configurator,
or during communication
serial cable between the GOT and PC is
disconnected
Connect the cable.
0x80112201
An unexpected error
occurred to S/W.
EZSocket GOT is installed, but the file is
broken.
Install software again.
0x80112202
Failed to make
communication with the
inverter during the time set
with Time Out.
Before starting FR Configurator
1. A cable between the GOT and PC is
disconnected.
2. The GOT power is OFF.
1. Connect the cable.
2. Power ON the GOT.
0x80112203
Failed to make
communication with the
inverter during the time set
with Time Out.
Electromagnetic interference, etc. are
affecting between the PC and GOT.
Set a larger value for Time Out setting of
the software and try again.
0x80112204
An unexpected error
occurred to S/W.
USB line error (at the GOT device error
communication ending)
Try again.
0x80112205
An unexpected error
occurred to S/W.
USB line error (sending function is invalid) Try again.
0x80112206
An unexpected error
occurred to S/W.
USB line error (receiving function is invalid) Try again.
0x80112207
An unexpected error
occurred to S/W.
USB line error (cable disconnection
registration failure)
After reconnecting with the GOT, try again.
0x80112208
Failed to make
communication with the
inverter during the time set
with Time Out.
USB line error (cable was disconnected
halfway)
1. When a cable between the GOT and PC
was disconnected during
communication.
2. When the GOT power turned OFF
during communication
1. Check for cable connection.
2. Power ON the GOT.
0x80112401
An unexpected error
occurred to S/W.
The GOT was not found on the network.
Check that the GOT is connected to the
network.
0x80112402
An unexpected error
occur
red to S/W.
Socket line open error (socket generation
failed)
Check that specified port number is correct
and specified IP address is for GOT.
0x80112403
An unexpected error
occurred to S/W.
Please contact your sales representative.
0x80112405
An unexpected error
occurred to S/W.
Network error
Check that the GOT is connected to the
network.
0x80112406
An unexpected error
occurred to S/W.
Connected socket forced disconnection
Check that the GOT is not making a
communication in other connection method.
Error Code
HEX)
Error Message Cause Countermeasure