Instruction manual

167
Error Code
5
TROUBLE INDICATION
0x80020001
An unexpected error
occurred to S/W.
Please contact your sales representative.
0x80020002
You cannot write a value
out of range to parameter.
Tried to write a value out of setting range of
the parameter.
Set a value within the setting range, and
write.
If a writing error occurs even if a value is
written within the setting range, check for
writing requirements of each parameter.
Refer to the Instruction Manual of the inverter
for writing requirements.
0x80020003
0x80020004
An unexpected error
occurred to S/W.
Please contact your sales representative.
0x80020005
0x80020006
0x80020007
0x80020008
Failed to obtain the
received data.
Failed to obtain the graph sampling data
during High Speed sampling.
Close other applications.
Set larger value for Mask Count.
Decrease the sampling CH.
0x80030001
Wrong communication port
is assigned.
1. Communication port is set invalid.
2. Other application is already using the
same port.
1. Activate the port by using Device
Manager.
2. Close other applications, and turn
ONLINE.
0x80030002
0x80030003
0x80030004
0x80030005
0x80030006
0x80030007
0x80030008
0x80030009
0x8003000A
0x8003000B
An unexpected error
occurred to S/W.
Please contact your sales representative.
0x8003000C
Duplicated station number
were found with USB
communication.
0x8003000D
An unexpected error
occurred to S/W.
Please contact your sales representative.
0x8003000E
Driver is not installed or
broken.
Driver is not installed or broken. Reinstallation of the software
0x8003000F
0x80030010
An unexpected error
occurred to S/W.
Please contact your sales representative.
Error Code
(HEX)
Error Message Cause Countermeasure