Instruction manual

154
I/O Terminal Assignment
4.12 I/O Terminal Assignment
Use "I/O Terminal Assignment" to assign signal to I/O terminals of the inverter or plug-in option.
Click of "I/O Terminal Monitor" to display "I/O Terminal Assignment" window.
Select terminal location to change the screen.
Select a signal for each terminal, then click . Necessary settings according to each terminal and the selected signal
are displayed in the Parameter List.
Click to reflect the changed setting into the Parameter List, then returns to the Main flame. To write the parameter
setting to the inverter, write from the Parameter List in the Main frame. (Refer to page 106)
No. Name Function and Description
A
Terminal Selection Select a location of terminal to be assigned. Select input terminal, output terminal or plug-in option.
B
Signal selection field Select a signal to be assigned.
C
Negative Logic Check when selecting negative logic for assigning signal of the output terminal.
D
Help Shows Help window.(Refer to page 160)
E
Cancel Closes the window with the invalid setting.
F
Next> Displays Parameter List.
G
Finish
Closes I/O terminal assignment at the Parameter List window with the valid setting.
Configured setting by I/O terminal assignment is reflected into Parameter List.
(Parameter writing to the inverter is not performed.)
EFD
A
C
B
G