Instruction manual

152
Batch Monitor (Monitor Area)
Monitored item list
Refer to the Inverter Instruction Manual for details of monitored items.
*1 Available for 75K or higher.
*2 Depending on the production year and month of the inverter, availability of monitoring may differ. For the details, refer to the Appendices of the Instruction
Manual of the inverter.
*3 Available for the FR-F700-NA and FR-F700-EC models.
Sampling Item
Model Name
A700 A701 F700(P) F700PJ E700 D700
Output Frequency
Output Current
Output Voltage
Frequency Setting Value
Running Speed –––
Motor Torque –– –
Converter Output Voltage
Regenerative Brake Duty –
*1
Electronic Thermal Relay Function Load Factor
Output Current Peak Value
Converter Output Voltage Peak Value
Input Power –––
Output Power
Load Meter –––
Motor Excitation Current ––––
Position Pulse ––––
Cumulative Energization Time
Orientation Status ––––
Actual Operation Time
Motor Load Factor
Cumulative Power
Torque Command ––––
Torque Current Command ––––
Motor Output ––––
Feedback Pulse ––––
SSCNET III Communication Status ––––
Motor Temperature
*2
–––––
Power Saving Effect ––
Cumulative Saving Power ––
PID Set Point
PID Measured Value
PID Deviation
Motor Thermal Load Factor –––
Inverter Thermal Load Factor –––
PTC Thermistor Resistance ––
*3
–
Cumulative Regenerative Power –
*2
––––
PID measured value 2 ––
*3
–––
BACnet reception status ––
*3
–––
BACnet token pass counter ––
*3
–––
BACnet valid APDU counter ––
*3
–––
BACnet communication error counter ––
*3
–––
Terminal CA output level ––
*3
–––
Terminal AM output level ––
*3
–––
: Available, – : Not available
Note
· If a communication error occurs, a batch monitor stops. To perform batch monitor again, solve the cause of the
communication error first, set the system OFFLINE once, and then ONLINE.
· When an inverter fault has occurred during Batch Monitor, the monitored value of Output Frequency, Output Current,
Output Voltage at fault occurrence are held.