Instruction manual

151
Batch Monitor (Monitor Area)
4
FUNCTION
4.10 Batch Monitor (Monitor Area)
"Batch Monitor" is for monitoring various data of a selected station. Export of monitored data into *.xls file is also available.
(Refer to page 94)
Select [B
atch Monitor] in [View] menu to display "Batch Monitor".
No. Name Function and description
A
Start Starts monitoring.
B
Stop Stops monitoring.
C
Clear Clears Peak Value and Current Value.
D
Station number Displays the station number being monitored.
E
Monitor State
Shows a state of monitor. If an error occurs, the color changes to red to display an error stop.
During monitoring, the following indication appears to indicate monitoring.
F
Filtering, All items
Hides unselected monitored items (filtering) or displays all.
(This button is valid when batch monitoring is in stop.)
G
Monitored item selection
Select the monitored items that are displayed when is clicked.
(All items are checked in the initial status. )
H
Monitor items Displays monitored item.
I
Peak Value
Displays the maximum value detected in each monitored item. The items without the monitor
selection check are not displayed.
J
Current Value
Displays the current monitoring value being measured in each monitored item. The items
without the monitor selection check are not displayed.
B C
H
A
I
D E
J
F
G