Instruction manual

140
Graph (Monitor Area)
*1 Depending on the production year and month of the inverter, availability of monitoring may differ. For the details, refer to the Appendices of the Instruction
Manual of the inverter.
*2 Monitoring is disabled during DC injection brake or during magnetic flux decay output shutoff.(The monitor displays "0".
)
*3 Available for the FR-F700-NA and FR-F700-EC models.
*4 Monitoring is disabled under V/F control or under Advanced magnetic flux vector control.(The monitor displays "0".)
*V Phase Output Current ––––––
*W Phase Output Current ––––––
*Converter Output Voltage ––––––
*Output Current (all three phases) ––––––
*Excitation Current(A) –
*2
–– –– –
*Torque Current(A) –
*2
–– –– –
Terminal 2 ––––––
Terminal 4 ––––––
Terminal 1 –––––––
*Excitation Current (%) –
*2
–– ––––
*Torque Current (%) –
*2
–– ––––
*Output Frequency (signed) –
*4
–– ––––
*Motor Speed –
*4
–– ––––
*Speed Command –
*4
–– ––––
*Torque Command –
*4
–– ––––
*Motor Torque –
*2*4
–– ––––
*Excitation Current Command –
*4
–– ––––
*Torque Current Command –
*4
–– ––––
: Available, – : Not available
Note
• Change the sampling mode (Monitor/High Speed) before setting sampling items. Since some monitor items are different
between the sampling mode, the setting of uncommon sampling item is cleared when changing the sampling mode. (Refer to
page 141)
• When making sampling item setting, set analog data (CH1 to CH4) in ascending order from CH1, and digital data (CH5 to CH8)
in ascending order from CH5.
• When sampling terminal 2, terminal 4, and terminal 1 of voltage input while Pr. 241 Analog input display is set to "0" (% display),
the sampled data appear as 10V=100%.
Example: Pr. 73 = 1 (terminal 2 input is 0 to 5V), Pr. 241 = 0 (% display)
Sampling data in the graph appear as 50% when 5V is input to terminal 2.
Model A700 A701 F700(P) F700PJ E700 D700
Sampling mode
Sampling item
Monitor
High speed
Monitor Monitor Monitor Monitor
High speed
Monitor