Instruction manual

107
Parameter List (System Area)
4
FUNCTION
4.6.1 Explanation of screen
• Item of Parameter List
No. Name Function and description
A
Parameter List display
format
Select a "Parameter List" display format. Click to display format of "Parameter List" from the
menu. (Refer to page 108)
B
All clear Performs all parameter clear with the selected inverter.
C
Parameter Clear Performs parameter clear with the selected inverter.
D
Batch Read Reads all parameter settings of the selected inverter.
E
Batch Write Writes values of Setting value field into the selected inverter.
F
Verification
Verifies parameter values set on FR Configurator and values already written into the inverter. (Refer
to page 111)
G
Read Reads the current value of the selected parameter from the connected inverter.
H
Write Writes the setting value of the selected parameter into the connected inverter.
I
Search Displays Search window. (Refer to page 113)
J
Edit Individual List Click to edit parameter Individual List. (Refer to page 113)
K
ALL List Returns display format of the Parameter List to All Parameter List.
Item Function and description
Input
availability
No.
Shows parameter number. When the current value and parameter initial value are different, " > "
appears in front of the number and the color turns green.
(Calibration parameters, Pr. 902, 903, 904, 905, etc. are displayed with ( ).)
–
Name Shows parameter name. –
Setting Range Shows setting range. –
Unit Shows minimum setting increments. –
Initial Value Shows initial parameter values. –
Current Value Shows the value read from the inverter or the value written to the inverter. –
Setting Value
Input a value desired to write to the inverter. Click or to write the value
into the inverter.
(Numeric value and a decimal point can be input up to 6 characters including a decimal point.)
Comment
A field for comments. Available to write one byte code up to 128 characters (2 byte code up to 64
characters).
: Available, – : Not available
REMARKS
Double-click a parameter name, or select a parameter and press F1 key to display a description of the selected parameter in the
help window.
B C
A
D E
F
G H
I
J
K