Instruction manual

102
System View (Navigation Area)
4.5.1 System setting
Function for browsing setting information of all 32 stations. Click in System View or select [System Setting] sub-
menu under [Navigation] of [View] menu to display "System Setting".
No. Name Function and description
A
Station number, inverter
type
Shows the station number and the inverter model.
B
OFFLINE
Changes to OFFLINE.
(Disconnect all inverters registered to the system)
C
ONLINE
Changes to ONLINE.
(Connect to all inverters registered to the system)
D
ON, OFF indicator
Shows ONLINE or OFFLINE state.
E
System Setting
Right-click on "System Setting" to display a pop-up menu. From the pop-up menu, System Batch Read
(Refer to page 52) or batch reading/batch writing of the parameters of all the stations set in the system
setting are available. (Refer to page 103)
F
Station number, inverter
type
Shows the inverter model on the right of station number if model setting has been already set to that
station number.
Clicking the station number selects the station number. (Press  or  to select the station number set
upward or downward.
Click on the left of the icon to open a tree view for checking a detail of the model setting.
Double-click on the station number to display Model Setting window.
G
Comment Displays a comment.
H
OP1 to OP3 Shows a name of plug-in option installed to the selected inverter.
C
A
B
D
G
H
F
E
When ONLINE When OFFLINE