Instruction manual

100
Test Operation (Navigation Area)
4.4.5 Sending of forward/reverse rotation command
• When performing inverter test operation
Test operation is performed during , is pressed. To stop the test operation, release , .
• At releasing of test operation
Releasing test operation enables operation to continue by pressing or once. Press to stop operation.
To release test operation, select [Options] in [Tool] menu to display "Option" window (Refer to page 92). Click , then
check "R
elease Test Operation" on the Preferences window and click ( or ).
Note
• If the selected station has been changed during Test Operation, FR Configurator sends stop command, and stops the
inverter.
• Do not click repeatedly each operation button, and . Doing so may result in unstable operation of FR
Configurator. If operation continues unintentionally, press to stop operation.
• Due to Windows operation style, test operation may be kept operating without pressing or if the
following movement is performed. To stop the operation, click .
Dragging a mouse cursor out of or while the button is pressed.
• Test operation ( , ) does not function during graph sampling of two or more stations with
communication through GOT (FA transparent function).
CAUTION
When communication is stopped (cable disconnection, etc.), personal computer cannot stop the inverter.
Make sure that safety precaution is provided with using signal loss detection (Pr. 122, Pr. 336, or Pr. 548), or
installing an external stop command device.
Perform test operation during
the button is pressed
Displays inverter running
frequency