Instruction manual

98
Test Operation (Navigation Area)
4.4.2 Indication of inverter frequency and fault
Shows output frequency or fault indication etc. of the selected inverter. If model setting of the selected station has been set
and changed to ONLINE, the indicator shows output frequency. During OFFLINE, or if model setting of the selected station
has not been set, indicator turns to blank. If unit of frequency (speed, machine speed) has been changed by parameter
setting, output frequency of selected station is indicated along with the change of the unit.
JOG, PS, PU STOP, Pr. CL, PCPY, Warning and Alarm are not displayed.
4.4.3 Indication of operation mode and switching
Click , , to switch the operation mode.
Operation mode of the selected inverter is shown at the operation mode indicating part.
REMARKS
• Depending on the current operation mode or parameter setting, some operation modes are unavailable for change. For
example, at the initial state, switching between PU operation mode and Network operation mode is unavailable. (Refer to page
27 or the inverter manual for details.)
Output frequency display
OFFLINE
Graph sampling
At fault occurrence (OC1) At communication error occurrence
Operation mode indication
Switches to PU
operation mode
Switches to External
operation mode
Switches to Network
operation mode
Indication of External/PU
combined operation mode