Instruction manual

3
1
OUTLINE
Before Using This Software
 Check the following settings before configuring the inverter with this software. If a communication option is installed, refer to
page 12 for details of the communication parameters.
1.1.1 Product confirmation
After unpacking, check that the following items are contained in the package:
Item Quantity
CD-ROM 1
Install Manual 1
USB connection
(FR-A700, A701, E700(SC)(NC))
Other
FR-A700
*2,
E700(SC)(NC)
Connecting with
which method?
Operation steps
Check the system
configuration
Install
FR Configurator
FR-E700(SC), D700, F700PJ
Other
FR-E700
Start FR Configurator
Connection using RS-485 terminal
(FR-A700, A701, E700
*1, F700, F700P)
*2 Depending on the production year
and month of FR-A700, the setting
range and initial value of Pr. 551 may
differ. For the details, refer to the
Appendices of the Instruction Manual of
the inverter.
Set Pr. 548 USB communication check time
interval "0".
Connecting
which inverter?
Set the station number (when connecting
multiple inverters) in Pr. 117 PU
communication station number.
Set Pr. 122 PU communication check time
interval "0" and,
Pr. 123 PU communication waiting time
setting = "9999".
Connecting
which inverter?
Connecting
which inverter?
Other
Set the operation
mode to PU operation
mode.
Set the operation
mode to NET operation
mode.
Set Pr. 122 PU communication check time
interval "0" and,
Pr. 123 PU communication waiting time
setting = "9999".
Set the station number (when connecting
multiple inverters) in Pr. 331 RS-485
communication station number.
Set Pr. 336 RS-485 communication check time
interval "0" and,
Pr. 337 RS-485 communication waiting time setting
= "9999".
Set Pr. 551 PU mode operation command
source selection = "3".
Connection using PU connector
(FR-A700, A701, D700, E700(SC),
F700, F700P, F700PJ)
*1 When using the control
terminal option (FR-E7TR)
(Refer to page 14 )
(Refer to page 18 )
(Refer to page 21 )
(Refer to page 4 )
(Refer to page 6 )
(Refer to page 32 )