Specifications

89
■ It is possible to use the positioning function equivalent to positioning modules AD75P2-S3 and
A1SD75P2-S3 of the MELSEC-A Series in a CC-Link slave station. Moreover, the following functions
are added:
 Home position return specified by data
 Speed/position switch control function (ABS mode)
 Absolute position detection function
■ Various software packages (GX Configurator-AP, SW□-AD75P) can be used to set positioning
parameters and data, as well as monitoring and tests.
1
■ Programs for accessing the buffer memory of AJ65BT-D75P2-S3 can be easily created using
CC-Link dedicated instructions (RIWT, RIRD) of the PLC CPU
2
.
1 RS-422/RS-232 conversion cables and A1SD75-C01HA conversion cables for the positioning module (converting between 25-pin and 14-pin connectors)
should be used for connection between AJ65BT-D75PA-S3 and a PC.
2 The CC-Link dedicated instruction can be used in combination with QCPU, QnACPU, AnUCPU, AnUSCPU and AnSHCPU.
Positioning Module
● Overview
Overview
● List of Model
AJ65BT-D75P2-S3
Positioning
module
Intelligent
device
490
Product name Model name Description Number of
occupied
stations
Station type Related manual Page with
detailed
information
2 axes (independent, linear and circular
interpolation at the same time), 400 kbps,
pulse count from -2147483648
to 2147483647
User's Manual
(Details)
IB-66824
(13JL46)
Master/Local
Remote I/OAnalog
High-Speed
Counters
PositioningHMIRepeatersRS-232
Interfaces
OptionSoftwareOthers
Technical
Information
CC-Link
-
CC-Link / LT
Bridge Modules
Support PC
Interfaces
Peripheral
Device
Connection