Specifications

141
■This is an interface block used to connect Mitsubishi Mi-
cro-PLCs of the FX0N, FX1N, FX2N, FX1NC and FX2NC
Series to a CC-Link network as remote-device stations
●With the micro-PLC, distributed control can be
made easily and economically.
●It is possible to communicate up to 112 points of bit
data and 16 words of word data (occupying four sta-
tions for both) with the master station.
●It is possible to select the number of communication
points to correspond to one to four occupied sta-
tions. The system can therefore be constructed ac-
cording to the size of the control configuration.
Number of
occupied stations
External dimensions
Weight
1 to 4 stations (set by the rotary switch) (remote device station)
5 VDC 130 mA (power is supplied from the PLC)
24 VDC 50 mA (uses external power supply. It is possible to use the service power supply of the PLC.)
Mitsubishi micro-PLCs
FX
0N, FX1N, FX2N Series
FX
1NC, FX2NC Series (connector conversion module required)
8 points for the FX PLC
42（W）×90（H）×87（D）mm
0.2kg
FX Series Interface Block
FX2N-32CCL
● Performance Specifications
Power supply
Supported PLC
Number of occupied
I/O points
Product
Description
Product
Description
Product
Description
Master/Local
Remote I/OAnalog
High-Speed
Counters
PositioningHMIRepeatersRS-232
Interfaces
OptionSoftwareOthers
Technical
Information
CC-Link
-
CC-Link / LT
Bridge Modules
Support PC
Interfaces
Peripheral
Device
Connection