Consumption tax is not included in the prices of all products listed in this catalog. Please be aware that consumption tax will be added to the price at the time of purchase. CC-Link Compatible Product Catalog For Safe Usage Open Field Network CC-Link Compatible Product Catalog Precautions in Usage ●Please read the manual before using the products listed in this catalog to ensure that they are used correctly.
New Line up! compatible products have been developed! CC-Link Ver. 2 can control a maximum of eight times data size compared with earlier CC-Link products. Maximum the eight times data size can be controlled! RX and RY (8192 points each) and RWr/RWw, 2048 words each ■ Master Module for Q Series ■ Analog Module AJ65VBTCU-68ADVN／AJ65VBTCU-68ADIN AJ65VBTCU-68DAVN QJ61BT11N P.74 New New P.18 P.78 " logo is The " printed on the products compatible with CC-Link Ver. 2.
Contents ■ Total Network Solution 2∼3 ■ CC-Link Family 4∼5 ■ Features of CC-Link 6∼7 ■ System Configuration Examples 8∼9 ■ Application Examples 10∼11 ■ Application Examples from 12∼13 ■ Product Information ・Master/Local Modules ・Remote I/O Modules ・Analog Modules ・High-Speed Counter Modules ・Positioning Modules ・Peripheral Device Connection Modules ・Communication Modules for HMI (GOT) ・PC Interface Boards ・Repeater Modules ・RS-232 Interface Modules ・CC-Link-CC-Link/LT Bridge Module ・Optional Par
Total Network Solution ・Total Network Solution POWER Q25HCPU Q12HCPU QX42-S1 MODE QX42-S1 MODE RUN RUN ERR USER QY42P QY42P ERR USER BAT BOOT BAT BOOT PULL PULL PULL USB USB RS-232 RS-232 POWER Q25HCPU Q12HCPU MODE QX42-S1 QX42-S1 MODE RUN RUN ERR USER BAT BOOT PULL PULL USB USB RS-232 RS-232 Q64P POWER Q25HCPU Q172CPU QJ71LP21-25 MODE MODE RUN QJ71C24-R2 QJ61CL12 RUN ERR USER QJ61BT-11 ERR USER BAT BOOT BAT BOOT FRONT PULL SSCNET CH2 PULL PULL CH1 SW I/O 1
Total Network Solution From information management to production control, machine control, device and I/O control ... Looking ahead to network interconnection in all of these layers, Mitsubishi has presented one product after another that are compatible with not only Ethernet but also MELSECNET/H and CC-Link. An integrated seamless network is realized in all levels of the hierarchy for FA application.
Family ・CC-Link Family To expand open network possibilities to every corner of a field. The CC-Link family realizes flexible system configuration. For machine control inside line CC-Link is a high-speed field network that can handle both control and information together. At high communication speed of 10Mbps, it is compatible with 100m transmission distance and up to 64 connectable stations. Thanks to this overwhelming performance, CC-Link was certified for SEMI standard and is accelerating its openness.
CC-Link Family For networking inside a panel/machine CC-Link/LT is a reduced-wiring network for use inside a panel/machine, designed to relieve onsite workers from complicated wiring, miswiring, etc. It is a practical solution for reducing wiring between sensors, actuators and controllers. Also, it utilizes the high performance of CC-Link such as fast response.
Features ・Features of CC-Link High Speed and High-Capacity Data Transmission CC-Link is a high-performance network that utilizes high speed communications (10 Mbps industry fastest), in order to allow transmission of bit data and word data at high speed and maximum capacity. High-speed cyclic transmission Large-capacity transient transmission (message data) Increasing the Distance with Ease The total distance covered by the CC-Link network can be increased up to 1.2 km (at 156 kbps).
Features of CC-Link Consistent Network Communication Time CC-Link can transmit bit data and word data at high speed with cyclic transmission, and the transmission time is stable as well (guarantee for regularity). The cyclic transmission time (link scan time) is not affected by irregular message transmission (transient transmission) to the HMI products. It is therefore possible to achieve highly stable control.
System the line-up Master/Local Modules A1SP60 CC-Link-CC-Link/LT Bridge Module CC-Link L RUN L ERR. P.122 FX2N-32MR 3 4 5 6 0 1 2 3 4 5 6 7 11 12 13 14 15 16 17 IN 10 RD RD Q25HCPU MODE Q172CPU RUN ERR USER NOS QJ71LP21-25 MODE RUN CC-Link/LT B RATE M RUN ERR. L RUN L ERR. SD TST MODE B 4 2 1 RATE NC 2 1 2 1 2 1 7 8 9 10 1 2 3 4 5 6 7 8 1 AD35ID1 POWER RUN BATT.V PROG.E CPU.E FX2N-16CCL- CC-Link STATION NO.
System the line-up Analog Modules P.72 Partner Products Cable Robot Solenoid Valves HMI Indicators, etc. Please see the CC-Link Partner Association Catalog. Others Communication Modules for HMI(GOT) P.98 Optional Parts Software P.126 P.132 Special function module FX Series Interface Blocks P.141 Inverters P.134 AC Servo Amplifiers P.135 Breakers P.142 Power Measurement Modules P.143 Industrial Robots P.138 Protective Relays P.145 CC-Link Dedicated Communication LSI P.140 CNC P.
Application ・Application Examples 1 System example using CC-Link Bottle filling line Improved workability by repeaters Using a repeater module, a T branch can be connected randomly even at 10Mbps communication speed. 10 Various devices can be connected. Increasable distance Various controllers such as inverters, servos, analog modules and ID controllers as well as I/O modules can be connected. The total extension distance of CC-Link is 1.2km (156kbps). However it can be extended up to 13.
Application Examples 2 System example combining and Automated warehouse Bridge Improved workability by repeaters CC-Link-CC-Link/LT bridge for seamless communication Workability of high degree of flexibility can be realized by optical/spatial repeaters, optical repeaters and repeaters (T branch). Data can be sent/received seamlessly from the host controller and monitoring/diagnostics can be performed using GX Developer.
Application ・Application Examples from the Industry CC-Link supports a number of different applications. ● Main Requirements Semiconductor /Electronic Component Production ● ● ● ● ● ● ● ● ● LED material packing machines Printed circuit board production line LCD production line Hard-disk parts production Hard-disk platter grinding devices Bump plating devices Liquid crystal filler Bonder CMP devices CC-Link conforms to the SEMI standard (SEMI E54.
Application Examples from the Industry Food Manufacturing /Medical Supply Chemical/Plant ● Main Requirements ● Detergent packing lines ● Tire-production devices ● Synthetic leather production lines ● Kiln preprocessing ● Polishing-agent weighing ● Concrete automatic weighing machines ● Powdered-tea production lines ● Food-packing machines, filling machines ● Hydrogen booster devices ● Cardboard production equipment ● Concrete production/filling devices for tunnel construction ● Blood-examination equipmen
Products information Open Field Network 14
From page 84 High-Speed Counter Modules From page 88 Positioning Modules From page 94 Master/Local Remote I/O Analog From page 72 Analog Modules High-Speed Counters From page 30 Remote I/O Modules Positioning From page 16 Master/Local Modules Peripheral Device Connection Product Information From page 98 HMI Peripheral Device Connection Modules From page 122 CC-Link-CC-Link / LT Bridge Modules From page 126 Repeaters RS-232 Interfaces From page 118 RS-232 Interface Modules CC-LinkCC-Link / LT
Master/Local Master/Local Modules Remote I/O Overview Analog Master/local modules control the CC-Link system with total freedom.
■ QJ61BT11N ● Ver. 2 mode Ver. 1 remote stations and Ver. 2 remote stations can be connected in a single network. A single master module can handle RX and RY (8192 points each), RWw 2048 words and RWr 2048 words of data. → For details of CC-Link Ver. 2, refer to Technical Information (page 157). Positioning ● Additional mode Ver. 2 remote stations can be added in a system configured with Ver. 1 remote stations. The sequence program for Ver. 1 remote stations can be used without having to be modified.
Master/Local Master/Local Module Remote I/O Product Description QJ61BT11N High-Speed Counters Analog For Q CPU Master station Positioning PLC CPU Peripheral Device Connection The Q Series is easy and safe Local station to use. PC Interfaces HMI PLC CPU Repeaters ● Features ■ CC-Link parameters RS-232 Interfaces It is possible to set the CC-Link parameters from the parameter setting screen of GX Developer (up to four master stations).
● Specification QJ61BT11N Remote I/O See page 154 for the general specifications. Master/Local Master/Local Module Analog ■ Functions for CC-Link: Cyclic transmission, expanded cyclic transmission, transient transmission, station-to-station cable length relaxation ■ Expanded cyclic setting at local station Single, double, guadruple, octuple ■ Internal current consumption 0.46 A ■ Weight 0.12 kg High-Speed Counters See page 148 for the CC-Link common specifications.
Master/Local Master/Local Module Remote I/O Product Description AJ61QBT11 High-Speed Counters Analog For QnA and Q4AR CPUs Master station Peripheral Device Connection Positioning PLC CPU Local station PC Interfaces HMI PLC CPU Repeaters ● Features RS-232 Interfaces ■ CC-Link parameters ■ Remote I/O network mode High-speed communication in the remote I/O network mode is possible when all slave stations are remote I/O stations. (Parameter setting is not necessary.
AJ61QBT11 1 Online (remote I/O network mode) Select this mode when performing data link in the remote I/O network mode. 2 Offline Data link is disconnected. 67 78 456 901 X1 23 ERROR Turns on at an error. L RUN On: Performing data link L ERR. On: Communication error (self-station) HOLD 3/4 2/3 The LED corresponding to the transmission speed set 456 89 67 A 23 CLEAR 1/2 1/4 ON SW 1 2 3 4 5 6 7 8 Number Transmission speed 0 156 kbps 1 625 kbps 2 2.
Master/Local Master/Local Module Remote I/O Product Description A1SJ61QBT11 High-Speed Counters Analog For QnAS and QnASH CPUs Master station Peripheral Device Connection Positioning PLC CPU Local station PC Interfaces HMI PLC CPU Repeaters ● Features RS-232 Interfaces ■ CC-Link parameters ■ Remote I/O network mode High-speed communication in the remote I/O network mode is possible when all slave stations are remote I/O stations. (Parameter setting is not necessary.
A1SJ61QBT11 L RUN On: Performing data link L ERR. On: Communication error (self-station) Data link is disconnected. 456 23 NC 1 DA 2 NC Condition setting switch SW OFF ON 1 M / L S.
Master/Local Master/Local Module Remote I/O Product Description AJ61BT11 High-Speed Counters Analog For AnN, AnA, and AnU CPUs as well as A273UH CPU Master station Peripheral Device Connection Positioning PLC CPU Local station PC Interfaces HMI PLC CPU Repeaters ● Features ■ Auto refresh RS-232 Interfaces Data communication can be easily performed using dedicated instructions, without using the FROM/TO instruction.
On: Communicating with the PLC CPU (FROM/TO). ERROR Turns on at an error. L RUN On: Performing data link L ERR. On: Communication error (self-station) 89 67 A 456 OFF ON M/L S MST − − − − CLEAR HOLD 1/2 3/4 1/4 2/3 − − ISFM SFM NC 1 DA NC 2 NC 4 NC 6 3 DB The LED corresponding to the transmission speed set 5 DG by the transmission speed setting switch turns on. On: Sending data RD On: Receiving data 901 78 23 901 78 7 SLD NC 625 kbps 2 2.
Master/Local Master/Local Module Remote I/O Product Description A1SJ61BT11 High-Speed Counters Analog For AnS, AnSH, AnUS, and AnUSH CPUs as well as A171SHCPUN and A172SHCPUN Master station Peripheral Device Connection Positioning PLC CPU Local station PC Interfaces HMI PLC CPU Repeaters ● Features ■ Auto refresh RS-232 Interfaces Data communication can be easily performed using dedicated instructions, without using the FROM/TO instruction.
LOCAL On: Set as a local station. CPU R/W On: Communicating with the PLC CPU (FROM/TO). ERROR Turns on at an error. L RUN On: Performing data link L ERR. On: Communication error (self-station) SD On: Sending data RD On: Receiving data 1/4 2 2. 5M 5M 10M NC 1 DA NC 2 Condition setting switch SW OFF ON 1 M / L S.
Master/Local Master Block Remote I/O Product Description FX2N -16CCL-M High-Speed Counters Analog For FX1N /FX2N and FX1NC /FX2NC CPUs Positioning (Remote I/O station) Peripheral Device Connection (Remote device station) (Master station) HMI (Remote device station) PC Interfaces (Remote I/O station) Repeaters ● Features Option CC-LinkCC-Link / LT Bridge Modules RS-232 Interfaces ● An FX PLC can be used as the master station for CC-Link.
FX2N-16CCL-M Station number setting switches LED display These switches are used for setting the module's station number. It is possible to check the data link condition by the on/off status of the LED display. 90 1 This is used for setting the module's operation mode. 6 Hardware test 01 EF 2 90 1 L RUN On: Performing data link (self-station) L ERR. On: Communication error (self-station) Flashing: The switch settings are changed while the power supply is turned on.
Master/Local Remote I/O Modules Remote I/O Overview Analog Pursuing the limits of trouble-saving in wiring work, reduction of size, and elimination of control boards AJ65SBTC□-□ AJ65VBTCU□-□ Terminal block type One-touch connector type Product description Page 36 Product description Page 48 PC Interfaces HMI Peripheral Device Connection Positioning High-Speed Counters AJ65SBTB□-□ AJ65BTB□-□ AJ65MBTL1N-□ Repeaters Embedded I/O Adapters CC-LinkCC-Link / LT Bridge Modules RS-232 Interfac
It is possible to confirm that the loose wire has been inserted into the prescribed position. Simple structure for pull-out prevention Loose wire Connector The lock mechanism is placed in the plug. It is easily connected to or removed from the connector.
Master/Local Remote I/O Modules Output module Remote I/O module Software Option CC-LinkCC-Link / LT Bridge Modules Compact type remote I/O module RS-232 Interfaces Repeaters PC Interfaces Product name Others Embedded output adapter Number of input points Description External load connection method Pagewith detailed information AJ65SBTB1-8D 8 DC+COM,–COM common input, one wire type Terminal block type 36 AJ65SBTB1-16D 16 DC+COM,–COM common input, one wire type Terminal block type 3
Support Technical Information Others Software Option CC-LinkCC-Link / LT Bridge Modules RS-232 Interfaces Repeaters PC Interfaces HMI Peripheral Device Connection Positioning High-Speed Counters Analog Memo 33 Remote I/O Master/Local
Remote I/O Master/Local Guide If the external connection is of this type…? Analog ? Selection of Remote I/O Modules Feature of module Positioning High-Speed Counters Selection condition Model name of the module that should be selected AJ65SBTB□-□ 36 AJ65BTB□-□ Terminal block type PC Interfaces This type uses the loose wire pressure-welding connection method, which makes wiring work easier.
Selection condition Feature of module Model name of the module that should be selected The ultra-miniature compact size will save space. AJ65SBTB□-□ AJ65VBTCU□-□ It is possible to connect the sensor easily without using a relay terminal block.
Master/Local Remote I/O Remote I/O Product Description AJ65SBTB□-□ AJ65BTB□-□ Analog Terminal Block Type AJ65SBTB□-□ High-Speed Counters ■ Saves labor due to easy wiring ● Equipped with "self-up screws" (no need to remove the terminal screws when wiring the round solderless terminals). ■ Can be installed directly on machines Positioning ● The charging area is covered by a finger protector on the upper part of the terminal block so that people cannot touch it.
AJ65SBTB□-□ AJ65BTB□-□ Transmission speed 0 156 kbps AJ65SBTB1-8D DA DG DB Turns on in case of a transmission error (CRC error) and turns off via timeout (L RUN also turns off). It turns on if the settings for station number and transmission speed are wrong. (It turns off when the settings are modified and the power supply is turned off then on again.) It flashes if the station-number and transmission-speed settings are changed while the communication is active. (L RUN also turns on.
Master/Local Remote I/O AJ65SBTB□-□ AJ65BTB□-□ Remote I/O ● External Connection Diagram Analog Unit: mm ●AJ65SBTB1-16□ ●AJ65SBTB3-8□ 40 High-Speed Counters 40 ●AJ65SBTB1-8□ ●AJ65SBTB2-8□ ●AJ65SBTB2N-8□ ●AJ65SBTB32-8□ 87.3 118 109mm+10 (mounting pitch) Two 4.5mm x 5.1mm mounting holes (for M4 mounting screws) STATION NO.
AJ65SBTB□-□ AJ65BTB□-□ Input Module Module power supply I/O power supply DA DB DG SLD +24V FG 24G Isolation DC/DC 8 X0 9 X1 10 X2 11 X3 12 X4 13 X5 14 X6 15 X7 16 COM 17 COM Module power supply R R R R DA DB DG SLD +24V FG 24G 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 X0 X1 X2 X3 X4 X5 X6 X7 X8 X9 XA XB XC XD XE XF COM COM Isolation DC/DC R R R R Peripheral Device Connection I/O power supply 1 2 3 4 5 6 7 High-Speed Counters 1 2 3 4 5 6 7 ●AJ65SBTB1-16D type, AJ65SBTB1-16D1 t
Master/Local Remote I/O AJ65SBTB□-□ AJ65BTB□-□ Remote I/O ● External Connection Diagram Input Module Analog ●AJ65SBTB2N-16A type ●AJ65SBTB3-8D type High-Speed Counters 1 DA 2 DB 3 DG 4 SLD 5 +24V 6 FG 7 24G 1 2 3 4 5 6 7 Isolation DC/DC Module power supply DA DB DG SLD +24V FG 24G Isolation DC/DC Module power supply HMI Peripheral Device Connection Positioning 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 X0 COM B X1 COM B X2 COM B
AJ65SBTB□-□ AJ65BTB□-□ Remote I/O ● External Connection Diagram Output Module 8 Y0 9 Y1 10 Y2 11 Y3 12 Y4 13 Y5 14 Y6 15 Y7 16 CTL+ 17 COM- I/O power supply (external power supply) L I/O power supply (external power supply) L L ●AJ65SBTB1-16T type Module power supply L 1 2 3 4 5 6 7 DC/DC Module power supply L Isolation DC/DC 8 Y0 9 Y1 10 Y2 11 Y3 12 Y4 13 Y5 14 Y6 15 Y7 16 Y8 17 Y9 18 YA 19 YB 20 YC 21 YD 22 YE 23 YF 24 CTL+ 25 COM- L Constant voltage circuit DA DB DG SLD +24V FG 24G
Master/Local Remote I/O AJ65SBTB□-□ AJ65BTB□-□ Remote I/O ● External Connection Diagram Output Module High-Speed Counters Analog ●AJ65SBTB1-8TE type Module power supply L Positioning Load power supply DA DB DG SLD +24V FG 24G 1 2 3 4 5 6 7 L I/O power supply (external power supply) ●AJ65SBTB1-16TE type 1 2 3 4 5 6 7 Isolation DC/DC Module power supply L 8 Y0 9 Y1 10 Y2 11 Y3 12 Y4 13 Y5 14 Y6 15 Y7 16 COM+ 17 CTL- In case I/O power supply and load power supply are common 16 COM+ 17 CTL
AJ65SBTB□-□ AJ65BTB□-□ Output Module L DB 3 DG 4 SLD 5 +24V 6 FG 7 24G 8 Y0 Isolation DC/DC Module power supply L 9 COM B 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 RA 10 Y1 11 COM B 12 Y2 13 COM B 14 Y3 15 COM B 16 Y4 17 COM B 18 Y5 19 COM B 20 Y6 21 COM B 22 Y7 L 23 COM B 24 COM A 25 COM B AC100/200V L DA DB DG SLD +24V FG 24G Isolation DC/DC Y0 COM B Y1 COM B Y2 COM B Y3 COM B Y4 COM B Y5 COM B Y6 COM B Y7 COM B Y8 COM
Master/Local Remote I/O AJ65SBTB□-□ Remote I/O ● External Connection Diagram Output Module Analog ●AJ65BTB1-16T type DA DB DG SLD +24V FG 24G Y0 Y1 Y2 Y3 Y4 Y5 Y6 Y7 COM1+ CTL1Y8 Y9 YA YB YC YD YE YF COM2CTL2+ DC/DC R R PC Interfaces HMI Peripheral Device Connection Positioning High-Speed Counters 1 2 3 4 5 DC24V 6 7 8 L 9 10 11 12 13 14 DC12/24V 15 16 17 18 L 19 20 21 22 23 24 DC12/24V 25 26 27 Support Technical Information Others Software Option CC-LinkCC-Link / LT Bridge Modules RS
AJ65SBTB□-□ AJ65BTB□-□ I/O Module L I/O power supply (external power supply) 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 X0 X1 X2 X3 X4 X5 X6 X7 Y8 Y9 YA YB YC YD YE YF Isolation DC/DC Module power supply R R L I/O power supply (external power supply) Constant voltage circuit 24 COM+ 25 COM- Load power supply L DA DB DG SLD +24V FG 24G 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 X0 X1 X2 X3 X4 X5 X6 X7 Y8 Y9 YA YB YC YD YE YF Isolation DC/DC R R 24 COM+ 25 COM- Constant voltage circu
Master/Local Digital I/O AJ65SBTB□-□ AJ65BTB□-□ Remote I/O ● External Connection Diagram I/O Module High-Speed Counters Analog ●AJ65SBTB32-8DT type Module power supply Positioning Three wire type sensor DA DB DG SLD +24V FG 24G 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 X0 COM+ X1 COMX2 COM+ X3 COMY8 COM+ Y9 COM+ YA COM+ YB COM+ DC24V DC24G Isolation DC/DC Module power supply R R Three wire type sensor L Constant voltage circuit I/O power supply (external power supply) 1 2 3 4
AJ65SBTB□-□ AJ65BTB□-□ Remote I/O ● External Connection Diagram I/O Module R RA Analog CC-LinkCC-Link / LT Bridge Modules RS-232 Interfaces R Option AC240V R Software L DC/DC Others DC24V R Technical Information DC24V DC24V DA DB DG SLD +24V FG 24G CTLG CTL+ X0 COMB X1 X2 COMB X3 X4 COMB X5 X6 COMB X7 COMA COMB Y8 COMD Y9 YA COMD YB YC COMD YD YE COMD YF COMC COMD R Repeaters ●AJ65BTB2-16DR type 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
Master/Local Remote I/O Remote I/O Product Description AJ65SBTC□-□ AJ65VBTCU□-□ Analog One-Touch Connector Type High-Speed Counters ■ Saves labor due to easy wiring Positioning ● Due to the loose wire pressure-welding wire-connection method (eliminating the need for soldering, wire stripping or screw tightening), the amount of man-hours needed for wiring work is dramatically reduced. Peripheral Device Connection There is no need for soldering, wire stripping or screw tightening.
AJ65VBTCU□-□ ●AJ65VBTCU□-16□ ③Station number setting switches CON L A I N K CON B CON L A I N K CON B 4 X0 to 1F PW PW L RUN L RUN L ERR L ERR X0 X1 X2 ④One-touch connector for communication X3 X4 Connector pin no. 1 0 1 2 3 4 5 6 7 8 9 A B C D E F X6 Name SLD NC 2 CON P C W ／ A U CON X D 1 V−/I− V＋/I＋ X8∼XF ⑤One-touch connector for power supply and FG Connector pin no. 54321 CON P C W ／ A U CON X D 5 ⑥Connector for input/output signals Pin no.
Master/Local AJ65SBTC□-□ Remote I/O AJ65VBTCU□-□ Remote I/O ● External Dimension Diagram Analog Unit: mm Positioning 40 High-Speed Counters ●AJ65SBTC1-32□ ●AJ65SBTC4-16□ 118 109mm +10 (mounting pitch) Peripheral Device Connection 16.5 Two 4.5mm x 5.
AJ65SBTC□-□ AJ65VBTCU□-□ Remote I/O ● External Connection Diagram Master/Local Remote I/O Analog ●Input Module ●AJ65SBTC1-32D, AJ65SBTC1-32D1 type DA DB DG SLD +24V FG 24G Isolation DC/DC High-Speed Counters 1 2 3 4 5 6 7 Module power supply R R CON1 1 2 R 3 R Positioning 4 R R CON2 1 2 R 3 R 4 Peripheral Device Connection R R CON8 1 2 R 3 R 4 I/O power supply HMI 8 COM 9 COM DA DB DG SLD +24V FG 24G 2 3 R R 4 R Black (white) Orange (orange) Brown (red) Blue (black) R
Master/Local Remote I/O AJ65SBTC□-□ AJ65VBTCU□-□ Remote I/O ● External Connection Diagram Analog ●Output Module ●AJ65SBTC1-32T1 type ●AJ65SBTC1-32T type High-Speed Counters 1 2 3 4 5 6 7 DA DB DG SLD +24V FG 24G DC/DC 1 CON1 1 L Positioning L 4 L 1 3 3 4 L 4 4 L 1 L CON8 Peripheral Device Connection CON8 2 2 I/O power supply (external power supply) I/O power supply (external power supply) Constant voltage circuit 8 CTL+ 9 COM- HMI CON1 3 3 L Isolation DC/DC 2 2
AJ65SBTC□-□ AJ65VBTCU□-□ Remote I/O ● External Connection Diagram Master/Local Remote I/O ●AJ65SBTC1-32DT2, AJ65SBTC1-32DT3 type DA DB DG SLD +24V FG 24G 1 2 3 4 5 6 7 Isolation DC/DC DA DB DG SLD +24V FG 24G Isolation High-Speed Counters ●AJ65SBTC1-32DT, AJ65SBTC1-32DT1 type 1 2 3 4 5 6 7 Analog ●I/O Module DC/DC Module power supply Module power supply CON1∼CON4 CON1∼CON4 1 1 R 2 R 2 R R 4 4 R R R R CON5∼CON8 CON5∼CON8 1 1 L 3 3 4 L Peripheral Device Connection 2 2
Master/Local Remote I/O Remote I/O Product Description AJ65MBTL1N-□ Analog Embedded I/O Adapters High-Speed Counters AJ65MBTL1N-□ New ■ Ultra-compact direct mountable adapter has been developed! Positioning ■ Realizing free and efficient design! PC Interfaces HMI Peripheral Device Connection ● Ultra-compact type ● Pin header connection ● Cascade connection ● An external additional filter is available to enhance noise durability ● Transformer-isolation for power supply, and photo-coupler isol
AJ65SBTW4-16□ Transmission speed setting switch Item checked PW Lit when the embedded I/O module of CC-Link is turned on. L RUN Checks if the embedded I/O module of CC-Link communicates correctly with the master station. The lamp lights up upon reception of correct data from the master station, or it is unlit upon time-out. L ERR PW L RUN L ERR. 0 156kbps X0 X1 X2 X3 X4 X5 X6 X7 1 625kbps 2 2.
Master/Local Remote I/O AJ65MBTL1N-□ Remote I/O ● External Connection Diagram Analog Input Module ●AJ65MBTL1N-16D ●AJ65MBTL1N-32D Pin No.
B31 DA A31 DB DG B30 DG SLD A30 FG B29 OE-OUT A29 OE-IN B28 B22 DA A22 DB DG B21 SLD A21 FG B20 OE-OUT SD-OUT A20 OE-IN A28 SD-IN B19 SD-OUT B27 RD A19 SD-IN A27 RDGON B26 Vacant A26 GND B25 Vacant A17 GND A25 Vacant Vacant B16 Vacant B24 A24 Vacant A16 Vacant Y0 B23 Y0 B15 Vacant Y1 A23 Y1 Y2 B22 Y2 Y3 A22 Y3 Y4 B21 Y5 A21 Internal circuit ＊2 DG B18 RD A18 RDGON B17 Vacant A15 Vacant X0 B14 X0 X1 A14 X1 Y4 X2 B13 X
Master/Local Remote I/O Remote I/O Product Description AJ65FBTA□-16□ AJ65SBTW4-16□ Analog Waterproof Connector Type High-Speed Counters AJ65FBTA□-16□, AJ65SBTW4-16□ ■ Waterproof type module compliant with the IP67 standard for water resistance ● The waterproof types of remote I/O modules employ a protective structure compliant with the IP67 standard. It can be used safely in an environment where water is used. Positioning ■ Modules can be replaced without stopping the system.
AJ65FBTA□-16□ AJ65SBTW4-16□ Remote I/O ● Name and Setting of Each Part Master/Local Remote I/O AJ65FBTA□-16□ OFF ON OFF ON OFF OFF ON ON No terminal resistor 110Ωterminal On 130Ωterminal On Setting prohibited Station number setting switches "10," "20," and "40" in STATION NO. are used for setting the second digit of the station number. "1," "2," "4," and "8" in STATION NO. are used for setting the first digit of the station number.
Master/Local AJ65FBTA□-16□ Remote I/O AJ65SBTW4-16□ Remote I/O ● External Dimension Diagram High-Speed Counters Analog AJ65FBTA4-16D, AJ65FBTA4-16DE AJ65FBTA2-16T, AJ65FBTA2-16TE AJ65FBTA42-16DT, AJ65FBTA42-16DTE Two 4.5mm x 6mm oblong holes for M4 mounting screws +1 60 0 48 4.3 33 34±0.5 6 68 +1 200 0 24 Recording chart 25 PC Interfaces 25 25 HMI Peripheral Device Connection 21.3 Positioning 26.5 192±1 50±1 18.3 Repeaters 6 4.1 RS-232 Interfaces 21.
AJ65FBTA□-16□ AJ65SBTW4-16□ AUX. R R R 1 3 5 2 4 4 2 1 3 5 Three wire type sensor (sink output) R R R R R R 4 2 1 3 5 R R R R R R 4 2 1 3 5 R R Pin no. X0 ― X1 X2 ― X3 X4 ― X5 X6 ― X7 R R R Pin no. 1 2 3 4 5 R Communication connector LINK OUT LINK IN SLD SLD DB DB DG DG DA DA Vacant No pin Power supply connector AUX. UNIT POWER +24V（I/O） +24V（UNIT） Vacant Vacant 24G（I/O） 24G（UNIT） Vacant Vacant FG FG I/O connector Pin no. Pin no. Pin no.
Master/Local Remote I/O AJ65FBTA□-16□ AJ65SBTW4-16□ Remote I/O ● External Dimension Diagram Analog ●Output Modules AJ65FBTA2-16TE AJ65FBTA2-16T PC Interfaces LINK OUT UNIT POWER RS-232 Interfaces Repeaters Module mounting screw (FG) AUX.
AJ65FBTA□-16□ AJ65SBTW4-16□ R R Two wire type sensor (sink output) R 4 2 1 3 5 R R R Pin no. 1 2 3 4 5 Pin no. 1 2 3 4 5 Pin no. X0 ― X1 X2 ― X3 X4 ― X5 X6 ― X7 R R R R R R Load L L 4 2 1 3 5 Communication connector LINK OUT LINK IN SLD SLD DB DB DG DG DA DA Vacant No pin Power supply connector AUX. UNIT POWER +24V（I/O） +24V（UNIT） Vacant Vacant 24G（I/O） 24G（UNIT） Vacant Vacant FG FG I/O connector Pin no. Pin no. Pin no.
Master/Local Remote I/O AJ65FBTA□-16□ AJ65SBTW4-16□ Remote I/O ● External Connection Diagram Analog AJ65SBTW4-16D Sink input LINK CABL Detection circuit Positioning 1 2 3 4 5 6 7 DA DB DG SLD +24V FG 24G DC/DC Source Module mounting screw CON1 4 2 1 3 Common for module POWER power supply CABL and I/O power supply Four wire type sensor (sink output) Sink Sink/source selector switch R R R R R CON8 4 2 1 3 R Detection circuit CON2 4 2 1 3 R Two wire type sensor (sink output) Detection cir
Support Technical Information Others Software Option CC-LinkCC-Link / LT Bridge Modules RS-232 Interfaces Repeaters PC Interfaces HMI Peripheral Device Connection Positioning High-Speed Counters Analog Remote I/O Master/Local Memo 65
Master/Local Remote I/O Remote I/O Product Description AJ65SBTCF□-□ AJ65VBTCF□-□ AJ65BTC□-□ Analog FCN Connector Type High-Speed Counters ■ Saves labor due to easy wiring HMI Peripheral Device Connection Positioning ■配線作業の省力化を実現 ●Due to the use of 40-pin connectors for I/O, the man-hours needed for wiring work are dramatically reduced.
AJ65VBTCF□-□ AJ65BTC□-□ 156 kbps 1 625 kbps 2 2.5 Mbps 3 5.0 Mbps 4 10 Mbps Station number setting switches N O B PW Turns on when the power supply to the remote I/O module is turned on. L RUN Turns on when normal data is received from the master station, and turns off via timeout. L ERR Turns on in case of a transmission error (CRC error) and turns off via timeout (L RUN also turns off). It turns on if the settings for station number and transmission speed are wrong.
Master/Local Remote I/O AJ65SBTCF□-□ AJ65VBTCF□-□ AJ65BTC□-□ Remote I/O ● External Dimension Diagram Unit: mm Analog ●AJ65VBTCF1-32□ 41 67 46 High-Speed Counters A J65VBTCF1-32DT1 LINK CON.A CON.B X0 Y10 XF Y1F PW L RUN L ERR 115 Positioning 0 1 2 3 4 5 6 7 8 9 A B C D E F PW/AUX. Peripheral Device Connection CON.C CON.D 16.
Remote I/O ● External Connection Diagram Master/Local AJ65SBTCF□-□ AJ65VBTCF□-□ AJ65BTC□-□ I/O Module Analog ●AJ65SBTCF1-32DT1 High-Speed Counters Positioning One-touch connector for communication One-touch connector for power supply and FG R R R R B13, A13 B12, A12 I/O power supply L CON1 B10, A10 RS-232 Interfaces L B3, A3 B1, A1 I/O power supply (external power supply) B2, A2 Constant voltage circuit L B3, A3 B1, A1 B2, A2 Repeaters CON1 B20, A20 PC Interfaces HMI DC/DC Peripher
Master/Local AJ65SBTCF□-□ AJ65VBTCF□-□ AJ65BTC□-□ Remote I/O Remote I/O ● External Connection Diagram Input Module I/O Module High-Speed Counters Analog ●AJ65SBTCF1-32D type PC Interfaces HMI Peripheral Device Connection Positioning Module power supply I/O power supply 1 2 3 4 5 6 7 DA DB DG SLD +24V FG 24G B20 B19 B18 B17 B16 B15 B14 B13 B12 B11 B10 B9 B8 B7 B6 B5 A20 A19 A18 A17 A16 A15 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 B2 B1 X0 X1 X2 X3 X4 X5 X6 X7 X8 X9 XA XB XC XD XE XF X10 X11 X12
Remote I/O ● External Connection Diagram Master/Local AJ65SBTCF□-□ AJ65VBTCF□-□ AJ65BTC□-□ Input Module High-Speed Counters R Positioning B20∼B5 DC/DC A20∼A5 Peripheral Device Connection R R B1,B2 PC Interfaces DC24V HMI R Output Module DC24V DC/DC B20~5 R A20~5 R Technical Information B1,B2 DC12/24V A1,A2 Others Software L Option CC-LinkCC-Link / LT Bridge Modules L 1 DA 2 DB 3 DG 4 SLD 5 +24V 6 FG 7 24G Repeaters ●AJ65BTC1-32T type RS-232 Interfaces 1 DA 2 DB 3 DG 4 SLD
Master/Local Analog Modules Remote I/O Overview High-Speed Counters Analog Achieves high precision and high resolution Analog to digital converter module Digital to analog converter module AJ65VBTCU-68DAVN Positioning AJ65VBTCU-68ADVN/68ADIN HMI Peripheral Device Connection New PC Interfaces Product description Page 74 Analog to digital converter module Product description Page 78 Digital to analog converter module AJ65SBT-64AD AJ65BT-64AD AJ65SBT-62DA AJ65BT-64DAV/64DAI Option CC-Li
Analog input Voltage input Current input 68ADVN 68ADIN AJ65VBTCU- 64AD AJ65BT- 64AD 68DAVN − 62DA 64DAV 64DAI Page with detailed information AJ65VBTCU-68ADVN 8 channels Voltage input 1/ 3 ＊ Remote device User's Manual (Details) SH-080401E (13JR65) 74 AJ65VBTCU-68ADIN 8 channels Current input 1/ 3 ＊ Remote device User's Manual (Details) SH-080401E (13JR65) 74 AJ65SBT-64AD 4 channels Voltage/current input 1 Remote device User's Manual (Details) SH-080106 (13JR18) 76 AJ65BT-64
Master/Local Analog Modules Remote I/O Product Description AJ65VBTCU-68ADVN AJ65VBTCU-68ADIN High-Speed Counters Analog Analog to digital converter module RS-232 Interfaces Repeaters PC Interfaces HMI Peripheral Device Connection Positioning New ● Compatible with Ver. 2 The module having occupied three stations for eight channels is renewed to be compatible with CC-Link Ver. 2 and occupies one station for eight channels. With this change, up to 42 modules can be connected to a single master.
Remote I/O ● Name and Setting of Each Part Master/Local AJ65VBTCU-68ADVN AJ65VBTCU-68ADIN Analog Modules SELECT/SET switch Analog Connector pin no. Operating condition LED display Description POWER On: When the power supply is turned Normal mode On: Normal operation On: When the SELECT/SET Pin no.
Master/Local Analog Module Remote I/O Product Description AJ65SBT-64AD AJ65BT-64AD Analog Analog to digital converter module High-Speed Counters ● AJ65SBT-64AD ● AJ65BT-64AD ■Analog Input ●Four channels (voltage input/current input) ●Analog values of −10 V to ＋10 V or −20 mA to ＋20 mA can be converted to digital values from 0 to ＋4000 or from −2000 to ＋2000.
On: When the power supply is turned on 4 MITSUBISHI OFFSET GAIN A J65SBT-64AD DA DG +24V 24G DB SLD (FG) On: When the transmission speed or station number setting is outside the range SELECT ON SET CH1 CH2 CH3 CH4 TEST V+ V+ I+ COM SLD COM AG I+ (FG1) I+ I+ TEST COM SLD COM V+ V+ LED display for offset/gain adjustment 1 ON OFF ON OFF ： OFF ON ： OFF Transmission speed setting switches Normal Always off mode Setting switch Setting value Terminal block DIN rail hook 2 OFF OFF ON ON OFF Tr
Master/Local Analog I/O Module Remote I/O Product Description AJ65VBTCU-68DAVN High-Speed Counters Analog Digital to analog converter module RS-232 Interfaces Repeaters PC Interfaces HMI Peripheral Device Connection Positioning New ● Compatible with Ver. 2 The module having occupied three stations for eight channels is renewed to be compatible with CC-Link Ver. 2 and occupies one station for eight channels. With this change, up to 42 modules can be connected to a single master.
AJ65VBTCU-68DAVN Remote I/O ● Name and Setting of Each Part Master/Local Analog Modules SELECT/SET switch Analog Connector pin no. Operating condition LED display 54321 Description POWER On: When the power supply is turned on Normal mode On: Normal operation 5 4 3 2 1 Name SLD NC DG DB DA RUN Test mode L RUN L ERR.
Master/Local Analog Module Remote I/O Product Description AJ65SBT-62DA AJ65BT-64DAV AJ65BT-64DAI Analog Digital to analog converter module High-Speed Counters ● AJ65SBT-62DA ● AJ65BT-64DAV ■Analog Output ●Four channels (voltage output) ●Digital values from −2000 to ＋2000 can be converted to analog values of −10V to ＋10 V. ● AJ65BT-64DAI ■Analog Output ●Four channels (current output) ●Digital values from 0 to ＋4000 can be converted to analog values of 4 mA to ＋20 mA.
Normal On: Normal operamode tion L RUN On: When the communication is normal RUN L RUN L ERR. CH1 2 OFFSET GAIN MITSUBISHI STATION NO.
Master/Local Analog Module Remote I/O Product Description AJ65BT-68TD AJ65BT-64RD3 AJ65BT-64RD4 Analog Temperature Input Module High-Speed Counters ● AJ65BT-68TD HMI Peripheral Device Connection Positioning ●It is possible to perform temperature/digital conversion of eight channels via one module. ●It is possible to use seven types of thermocouple (K, E, J, T, B, R, S) conforming to the JIS standard. ●It is possible to select any thermocouple for each channel.
Operating condition LED display Transmission speed setting switch LED name SW 0 1∼8 9 MODE NORMAL TEST CH. TEST PW RUN L RUN SD RD L ERR. 0 1 4 2 3 MODE 8 7 9 0 1 6 5 4 OFFSET UP RESET DOWN GAIN Select this when ending the test mode and NORMAL entering normal operation (factory setting) These settings select a channel for which 1 to 8 TEST CH. errors are compensated for in the test mode. 9 TEST Select TEST to compensate for errors. The test mode is entered after 2 seconds.
Support Technical Information Others Software Option CC-LinkCC-Link / LT Bridge Modules RS-232 Interfaces Repeaters PC Interfaces HMI Peripheral Device Connection Positioning High-Speed Counters Analog Remote I/O Master/Local High-Speed Counter Modules Overview Pulses from pulse generators and similar equipment can be acquired and counted.
■ All the high-speed counter modules are remote-device stations. ■ It is possible to select from three types of counter modules, depending on the output method of the external device connected to the counter modules.
Master/Local High-Speed Counter Module AJ65BT-D62 AJ65BT-D62D AJ65BT-D62D-S1 Analog Remote I/O Product Description High-Speed Counters ● AJ65BT-D62/D62D/D62D-S1 Positioning ■ Large counting range, from 0 to 16777215 (24-bit binary). ■ External input: 5/12/24 VDC (2 to 5 mA) ■ It is possible to multiply the count value. ■ It is possible to count slow rising and falling edges without errors by switching to the slow counting speed.
Transmission speed setting switch Station number setting switches This is used for setting the transmission speed of the high-speed counter module (for data link). The station number of the high-speed counter module should be set within the range from 1 to 61. "X10" is used for setting the ten-digit of the station number. "X1" is used for setting the unit-digit of the station number. Other than 0 to 4 Not used (If other than 0 to 4 is set, L ERR. LED turns on and a communication error occurs.
Master/Local Positioning Module Remote I/O Overview PC Interfaces HMI Peripheral Device Connection Positioning High-Speed Counters Analog Complicated positioning control tasks can be handled by reading various signals, parameters and data, and by implementing the control loop on a PLC CPU.
● Home position return specified by data ● Speed/position switch control function (ABS mode) ● Absolute position detection function ■ Various software packages (GX Configurator-AP, SW□-AD75P) can be used to set positioning parameters and data, as well as monitoring and tests. ＊1 ■ Programs for accessing the buffer memory of AJ65BT-D75P2-S3 can be easily created using CC-Link dedicated instructions (RIWT, RIRD) of the PLC CPU ＊2.
Master/Local Positioning Module AJ65BT-D75P2-S3 Analog Remote I/O Product Description PC Interfaces HMI Peripheral Device Connection Positioning High-Speed Counters ■ The positioning modules can be de-centralized. ■ An absolute position detection system can be easily constructed by using the AC servo MELSERVO-H/J2/J2S Series.
AJ65BT-D75P2-S3 Remote I/O ● Name and Setting of Each Part Master/Local Positioning Module Axis LED display These LEDs display power-supply status and data-communication status. On: Normal operation L RUN On: When the communication is normal SD Turns on during data transmission RS-422 connector for peripherals This connector is used for connection with peripheral devices. RD Turns on during data reception L ERR.
Master/Local AJ65BT-D75P2-S3 Positioning Module Remote I/O ● External Connection Diagram Analog ■ Example of Connection between D75P2 and MR-J2/J2S-□A (Differential Driver (Open Collector), Negative Logic ＊5) High-Speed Counters The figure below does not have a connection for recovering absolute position. See the next page for the connection for recovery of absolute position. Configure a sequence which will cut off the MC in case of an alarm or emergency stop.
AJ65BT-D75P2-S3 Remote I/O ● External Connection Diagram Master/Local Positioning Module MR-J2/J2S-□A （CN1A） D75P2 INPS 8 9 COM 18 INP PGO (5V) 24 5 LZ PGO COM 25 15 LZR CLEAR COM Positioning 26 CLEAR 5 8 CR 23 10 SG PULSE F+ 3 3 PP PULSE F- 21 13 PG PULSE R+ 4 36 NP PULSE R- 22 SON 29 ABSM 30 ABSR 31 D01 17 ZSP 18 TLC 34 HMI 3 NG SD Plate （CN1B） PC Interfaces 5 SON 8 PC 9 TL 4 D01 Repeaters 19 ZSP 6 TLC Manual pulse generator (MR-HDP01) DOG 11 FLS 12
Support Technical Information Others Software Option CC-LinkCC-Link / LT Bridge Modules RS-232 Interfaces Repeaters PC Interfaces HMI Peripheral Device Connection Positioning High-Speed Counters Analog Remote I/O Master/Local Peripheral Device Connection Module Overview Module for operating PLC CPU remotely via CC-Link AJ65BT-G4-S3 94 Product description Page 96
Remote I/O ● Overview Available MELSEC PLC programming software Developer（SWnD5C-GPPW） GX Component（SWnD5C-ACT） GX Configurator-CC（SWnD5C-J61P） GX Configurator-AD（SWnD5C-QADU） GX Configurator-DA（SWnD5C-QDAU） GX Configurator-CT（SWnD5C-QCTU） GX Configurator-TC（SWnD5C-QTCU） GX Configurator-FL（SWnD5C-QFLU） GX Configurator-TI（SWnD5C-QTIU） GX Configurator-PT（SWnD5C-QPTU） IBM PC/AT compatible PC SW□IVD-GPPA,SW□IVD-GPPQ PC-9800 SW□NX-GPPA,SW□NX-GPPQ Remark GX Developer that supports QCPU is
Master/Local Peripheral Device Connection Module AJ65BT-G4-S3 Analog Remote I/O Product Description High-Speed Counters ■It is possible to perform remote operation via CC-Link. Online operations such as PC write, PC read, monitoring and test can be performed from peripheral devices to QCPU, QnACPU and ACPU modules at remote locations on the CC-Link network. Positioning ■It is possible to connect various peripheral devices.
AJ65BT-G4-G3 Remote I/O ● Name and Setting of Each Part Transmission speed setting switch These switches are used for setting the station number of G4-S3 in the range from 1 to 63 or 1 to 64. B RATE STATION NO. X10 X1 0 1 0 1 90 1 2 2 2 8 3 3 3 7 65 4 65 4 4 SW 12345678 SW1 SW6 MODE AJ65BT-G4-S3 PW RUN L RUN SD RD L ERR.
Master/Local Communication Modules for HMI (GOT) Remote I/O Overview Positioning High-Speed Counters Analog The GOT-A900/800 Series GOTs can be used in CC-Link.
○ ○ Memory information ○ ○ Clock set ○ × Screen cleanup ○ ○ ＊ ○：Function supported ○ △ ＊The data storage time cannot be displayed. File ×：Function not supported △：Limited support HMI ■Differences in the sprite functions supported A8GT-J61BT15 does not support a clock function. It does not support the generation timetable in the alarm-list display and time display of the Alarm History function.
Master/Local Communication Modules for HMI (GOT) A8GT-J61BT13 Analog Remote I/O Product Description Peripheral Device Connection Positioning High-Speed Counters ■Connection to CC-Link It is possible to monitor all the devices of the master station/local station's PLCs via transient transmission and to perform monitoring by cyclic transmission by A900/800 Series GOT combined with A8GT-J61BT13 CC-Link module.
Remote I/O ● Name and Setting of Each Part Master/Local A8GT-J61BT13 Communication Modules for HMI (GOT) Mode setting switch RUN L RUN SD X1 23 78 901 901 901 23 STATION NO. MADE IN JAPAN BAUDRATE Transmission speed 156kbps (factory setting) 625kbps 2.5Mbps 5Mbps 10Mbps Not used (If other than 0 to 4 is set, L ERR. LED turns on and a communication error occurs.) BD992C000H58 Do not mount nor dismount a module while the power is supplied.
Master/Local Communication Modules for HMI (GOT) A8GT-J61BT15 Analog Remote I/O Product Description Positioning High-Speed Counters ■Connection to CC-Link It is possible to perform monitoring by cyclic transmission by A900/800 Series GOT combined with A8GTJ61BT15 CC-Link module. Peripheral Device Connection ■Station type This module is a remote device station. It is possible to select either two or four stations.
A8GT-J61BT15 Remote I/O ● Name and Setting of Each Part Master/Local Communication Modules for HMI (GOT) SD RD L ERR. Station number setting switches 9 0 1 switches are used for setting ｝These the station number in the range from 4 5 6 7 8 ⃝×10 ↑ ⃝×1 ↑ OCCUPY STATION 2 3 9 0 1 4 5 6 STATION NO. 7 8 X1 7 8 Other than 0 to 4 BAUDRATE DB SLD FG1 NC Transmission speed 156kbps (factory setting) 625kbps 2.5Mbps 5Mbps 10Mbps Not used (If other than 0 to 4 is set, L ERR.
Master/Local PC Interface Boards Remote I/O Overview Positioning High-Speed Counters Analog IBM PC/AT compatible PCs can be used as master/local stations of CC-Link. Master station Peripheral Device Connection PC equipped with PCI bus HMI Local station Repeaters PC Interfaces PC equipped with PCI bus Local station RUN MST SD ERR. 456 456 23 0123 RUN T.PASS SD ERR MNG D.LINK RD ERR 4567 89AB CDEF 1 2 3 4 5 6 7 Option CC-LinkCC-Link / LT Bridge Modules PULL 78 QJ71BR11 MNG D.
Master/Local Remote I/O Analog HMI Peripheral Device Connection ■It is possible to incorporate PCs equipped with PCI bus into the CC-Link system as master/local stations. ■A80BDE-J61BT11 can be used as a master/local station, and A80BDE-J61BT13 as a local station. ■Drivers supporting various OS are supplied together with the module (Windows® 2000, Windows® NT Ver 4.0, Windows® 98, Windows® 95). ■Windows® 2000 or Windows® NT Ver 4.0 must be used if A80BDE-J61BT11 is used as the master station.
Master/Local PC Interface Boards A80BDE-J61BT11 A80BDE-J61BT13 (Master/Local Station) (Local Station) PC Interface boards Analog Remote I/O Product Description CC-LinkCC-Link / LT Bridge Modules RS-232 Interfaces Repeaters PC Interfaces HMI Peripheral Device Connection Positioning High-Speed Counters ■A PC incorporating a PCI bus can be used as the master station, standby master station*1, or as a local station by mounting A80BDE-J61BT11, or as a local station by mounting A80BDEJ61BT13.
Remote I/O ● Name and Setting of Each Part Operation LED display ERR. Turns on when the network communication status is abnormal. Data link c o m m u n ication is normal. SD Flashes during data Flashes during data link link data transmis- transmission. sion. RD Flashes during data link data reception. RD Data link communication is abnormal. RUN ERR HIGH Analog ・WDT error ・The power supply to the PC is turned off. LOW SD Flashes during data link reception.
Master/Local Repeater Modules Remote I/O Overview High-Speed Counters Analog Various repeater modules expand the range of CC-Link adaptations and enhance the freedom of application.
AJ65SBT-RPT 110 AJ65SBT-RPS AJ65SBT-RPG 112 AJ65BT-RPI-10A AJ65BT-RPI-10B 114 ● List of Models Product name CC-Link system repeater (T-branch) module Model name Number of occupied stations Station type Related manual Page with detailed information User's Manual IB-0800078 (13JQ81) 110 AJ65SBT-RPT Maximum number of connected levels: 10, T-branch wiring is possible. ― ― AJ65SBT-RPS SI/QSI-type optical fiber cables are used (combining and using two modules).
Master/Local Repeater Module Remote I/O Product Description AJ65SBT-RPT Analog CC-Link System Repeater (T-Branch) Module High-Speed Counters ■A T-branch configuration can be included in the CC-Link network. By placing this module between other modules in the CC-Link system, T-branches can be inclu ded in the CC-Link network at all supported speeds (10 Mbps, 5 Mbps, 2.5 Mbps, 625 kbps and 156 kbps).
Reset switch Test switch The status of the module can be checked by the on/off status of the LED display. Pressing this switch resets the module's hardware. (The factory setting is OFF.) Switch status Operation status ON Hardware test OFF Normal operation This is used to set the operating condition of the module. (The factory setting is OFF.) Switch status Operation status ON Hardware test OFF Normal operation On: A hardware test is being performed.
Master/Local Repeater Module Remote I/O Product Description AJ65SBT-RPS AJ65SBT-RPG Analog CC-Link System Optical Repeater Module Positioning High-Speed Counters ■CC-Link system optical repeater module The transmission distance of the CC-Link system can be extended. It is possible to extend the transmission distance of the CC-Link system by using pairs of these products, either AJ65SBT-RPS (for SI/QSI type optical fiber cable) or AJ65SBT-RPG (for GI type optical fiber cable).
Combinations of optical repeater module and optical fiber cable to be used Intelligent Repeater ＊1 Repeater＊1 Remote I/O station （AJ65SBT-RPS/RPG） device station （AJ65SBT-RPS/RPG） The optical repeater modules can be used in the following combinations with optical fiber cable. Optical repeater module [Segment (first level)] Repeater ＊1 （AJ65SBT-RPS/RPG） Remote I/O station ＊1 The repeater is a module used to connect each segment and extend the CC-Link system.
Master/Local Repeater Module Remote I/O Product Description AJ65BT-RPI-10A AJ65BT-RPI-10B Analog CC-Link System Wireless Optical Repeater Module High-Speed Counters ■Wireless transmission can be achieved by infrared light.。 Positioning By using AJ65BT-RPI-10A and AJ65BT-RPI-10B modules combined, it becomes possible to perform wireless transmission in the CC-Link system over distances from 0 to 100 m using infrared light.
● Performance Specifications AJ65BT-RPI-10A Model name 161（W）×100（H）×57.5（D）㎜ Transmission speed 2.
Master/Local AJ65BT-RPI-10A AJ65BT-RPI-10B Remote I/O Repeater Module ● System Configuration High-Speed Counters Analog [Segment ＊2 ] Master station＊3 ＊1 Remote I/O Repeater (module A/B) station Intelligent device station Repeater＊1 (module A/B) [Segment (first level)] Peripheral Device Connection Positioning Remote I/O station Repeater＊1 (module A/B) Intelligent device station Remote device station [Segment (first level)] Local station Remote I/O station HMI [Segment (second level) ＊4
● Module Connection Master module AJ65BT-RPI-10A/10B Remote module DA DA DA DB DB DB DG SLD FG DG DG CC-Link dedicated cable ● Important ● CC-Link dedicated cables with the same specifications should be used within each segment. Normal data transmission cannot be guaranteed if multiple specifications are used.
Master/Local RS-232 Interface Module It is possible to perform data communication with external devices, such as bar-code readers and ID controllers that communicate via RS-232, and general-purpose PCs.
Remote I/O ● Overview Master/Local RS-232 Interface Module PLC CPU A1S62P A2USCPU POWER A1SP60 STOP RUN L.CLR ERROR RESET Analog Master station A1SP60 RUN A1SJ61BT11 RESET A1SJ61BT11 AD35ID1 High-Speed Counters Bar-code reader Data reception It is possible to send data to external devices automatically whenever the transmission conditions (e.g., changes of RX, RY and RW) specified by the user are met. ■Two points of general-purpose input and output are provided as standard.
Master/Local Product Description RS-232 Interface Module AJ65BT-R2 Analog Remote I/O Product Description High-Speed Counters ■One channel of the RS-232 interface can be used. ■The general-purpose input/output function is available. Two general-purpose input and output points are provided. Positioning ■Easy programming with the automatic buffer memory update function Programming is easy because data read/write operations from/to external devices can be performed via the FROM/TO instruction.
Remote I/O ● Name and Setting of Each Part Transmission speed setting switch Pressing this switch causes the module to return to the status when the power supply is turned on. RS-232 transmission specification setting switch This is used for setting the RS-232 transmission specification.
Master/Local CC-Link-CC-Link/LTBridge Module Remote I/O Overview High-Speed Counters Analog Seamless connection is realized between CC-Link and CC-LInk/LT A1S62P A2USCPU POWER RUN POWER L.CLR A1SX80 STOP RUN RESET A1SJ61BT11 RESET Bridge Module PW CC-Link L RUN L ERR. CC-Link/LT L RUN L ERR. L ERR. CC-Link STATION 40 20 10 8 NO.
Master/Local Analog ● Overview Remote I/O CC-LInk-CC-link/LT Bridge Module Positioning High-Speed Counters ■Maximum 224 points can be controlled with a single bridge module. ■The master station of CC-Link can monitor the state of remote I/O stations of CC-Link/LT. ■CC-Link/LT can be configured with A and QnA Series. ●Applicable master modules HMI FX Series can be used in the following range of the number of input/output points.
Master/Local CC-Link-CC-Link/LT Bridge Module AJ65SBT-CLB High-Speed Counters Analog Remote I/O Product Description Repeaters PC Interfaces HMI Peripheral Device Connection Positioning ■Seamlessly connecting two networks The AJ65SBT-CLB is a bridge module that enables seamless connection of the CC-Link and CC-Link/LT networks. Up to 224 points (448 points when using I/O) can be controlled with one bridge module by using RX and RY (bit devices).
Master/Local AJ65SBT-CLB Analog ● Name and Setting of Each Part LED Display Operation setting switch Lit: Data link execution in progress Unlit: Data link stopped Lit: Self loop-back test normal Unlit: Self loop-back test fault ERR. CC-Link Lit: Data link fault station detection. Some stations are out of control range.
Master/Local Optional Parts Remote I/O Overview High-Speed Counters Analog Various optional parts are available for I/O modules.
Online connector for power supply A6CON-LJ5P AJ65VBTCU□-□type digital I/O module AJ65VBTCU-□type analog I/O module Product description Page 129 Application A6CON-PWJ5P AJ65VBTCU□-□digital I/O module AJ65VBTCU-□type analog I/O module Product description Page 129 FCN connector Application A6CON1 A6CON2 A6CON3 AJ65SBTC□-□type digital I/O module AJ65BTCF□-□type digital I/O module AJ65VBTCF□-□type digital I/O module Product description Page 130 Page 131 Module mounting fitting Model name Applicati
Master/Local Optional Parts for I/O Modules A6CON-P214 A6CON-P220 Remote I/O Product Description A6CON-P514 A6CON-P520 Analog One-Touch Connector Plug Peripheral Device Connection Positioning High-Speed Counters The following are one-touch connectors for input/output. Due to the easy-to-use loose wire pressurewelding connection method (eliminating the need for soldering, wire stripping and screw tightening), the man-hours required for wiring work can be dramatically reduced.
A6CON-LJ5P A6CON-TR11 A6CON-PWJ5P Online Connector for Communication, Power Supply One-Touch Connector with Terminal Resistor Online connector for communication A6CON-LJ5P ●By using online connectors for communication and power supply, it is possible to replace modules without stopping the communication. Positioning RS-232 Interfaces ●The IN and OUT sides for the communication cable and power supply cable are connected separately; laying out the wiring on a circuit board is surprisingly easy.
Master/Local Optional Parts for I/O Modules Remote I/O Product Description A6CVR-8 A6CVR-16 A6CVR-32 Analog Protective cover Positioning High-Speed Counters These protective covers can be easily attached on digital I/O modules of the AJ65SBTB□-□ (terminal block type) and the AJ65SBTC□-□ types (one-touch connector type), as well as repeater modules of the AJ65SBT-RP□ type.
A6CAP-DC1 is a dust-proof cap, and A6CAP-WP1 and A6CAP-WP2 are waterproof caps conforming to the IP67 standard. A6CAP-WP1 (aluminum) and A6CAP-WP2 (resin) are optional parts for remote I/O modules of the AJ65FBTA□□ and AJ65SBTW□-□ types.
Master/Local Software GX Configurator-CC Analog Remote I/O Product Description SW□D5C-J61P-E Configurator for CC-Link ■It is possible to set parameters directly in Windows® without having to create a sequence program. High-Speed Counters Positioning The parameter setting part of the conventional sequence program can be performed with J61P. Peripheral Device Connection Set the parameters with J61P and write to E2PROM .
Master/Local Software SW8D5C-GPPW-E MELSEC Programming Software Operating environment Windows® 95 (English version), Windows® 98 (English version), Windows® NT, Workstation 4.0 (English version), Windows® 2000 Professional (English version), Windows® ME (English version) CPU Pentium 133 MHz or morev＊1 Display Resolution: 800 x 600 or more (1024 x 768 are recommended.) Memory 32 MB min.,for Windows® 2000:64MB min.,for Windows® XP:128MB min.＊2 150 MB min.
Master/Local Inverters FREQROL-□500 Analog Remote I/O Product Description ■FREQROL-E500 Series High-Speed Counters FR-E520-0.1KN to 7.5KN 9 models FR-E540-0.4K to 7.5K 7 models 16 models in total ●Torque outputs as high as 150 percent is achieved at a low speed and 1 Hz. ●FR-E540-□K uses the optional FR-A5NC inverter module, which means that the inverters can be connected to the CC-Link. Up to 42 inverters can be connected.
Position data input ＊ Up to 31 points Position data (feed rate) Speed data Absolute position system Number of occupied stations ⃝ Positioning Peripheral Device Connection (When occupying 2 stations) ⃝ 1 station/2 stations (remote device station) ● Web home page for MR-J2S Series MELFANS compatible with CC-Link http://www.nagoya.melco.co.jp/servo/nproduct/mr-j2scc/j2scc01d.
Master/Local AC Servo Amplifier MR-H□TN High-Speed Counters Analog Remote I/O Product Description PC Interfaces HMI Peripheral Device Connection Positioning ●This servo amplifier has a built-in positioning function, so a positioning controller is not required. ●The best choice for high-frequency feeding applications such as press feeders, cut-sheet feeders, etc. ●It is possible to send positioning data, start and stop commands, and monitor the status via CC-Link.
Master/Local CNC Product Description Analog Remote I/O MELDAS Series Peripheral axes （MR-J2-CT） Machine interface Machine contacts (standard/max.
Master/Local Industrial Robot Analog Remote I/O Product Description RP, RV-A, RH-A, RV-T, RH/RC-G Series High-Speed Counters Network functions are strengthened so that the robot controller realizes configuration of various systems. The robot controller is compatible with the robots listed on the right side page. (Contact us for combination.) Positioning ■With its reinforced network functionality, this robot controller can be used in various system structures.
Master/Local Remote I/O Analog ■Small size, high speed and high accuracy are realized. Peripheral Device Connection ●Max. load 1kg to 5kg ●Max. reaching radius 236mm to 453mm ●Cycle time 0.28 sec ＊ High-Speed Counters * Our standard conditions Positioning These robots are compatible with the controllers specified on the left side page. (Contact us for combination.
Master/Local Dedicated CC-Link Communication LSI MFP1 MFP2 MFP2A MFP3 High-Speed Counters Analog Remote I/O Product Description ■The development of CC-Link compatible devices is made easy. Option CC-LinkCC-Link / LT Bridge Modules RS-232 Interfaces Repeaters PC Interfaces HMI Peripheral Device Connection Positioning ●CC-Link compatible devices can be developed easily without worrying about the communication protocol. Also the CC-Link communication protocol is built-in.
42（W）×90（H）×87（D）mm Weight 0.2kg Positioning RS-232 Interfaces External dimensions CC-LinkCC-Link / LT Bridge Modules 8 points for the FX PLC Option Number of occupied I/O points Software Supported PLC 5 VDC 130 mA (power is supplied from the PLC) 24 VDC 50 mA (uses external power supply. It is possible to use the service power supply of the PLC.
Master/Local Breaker MDU Breaker Analog Remote I/O Product Description High-Speed Counters ■A breaker equipped with a display function The built-in VT and CT save space. RS-232 Interfaces Repeaters PC Interfaces HMI Peripheral Device Connection Positioning ●This conventional low-pressure breaker is equippedwith adisplay function.
Master/Local EMU-C3P5 EMU-C3P5-5A Number of occupied stations 5 A (current on the first current sensor side) Current (each phase, total, demand, and maximum demand value) Voltage (each phase, total, and maximum value) Power (current, demand, and maximum demand value) Electric energy (integrating, time integrating, and maximum time) Leakage current (current, demand, and maximum demand value) Each maximum value generation time Positioning Peripheral Device Connection HMI RS-232 Interfaces 250 A/100 A/50
Master/Local Multi-Circuit Electric Power Measuring Module ＥＭＵ-Ｃ7Ｐ4 -6-Ａ Analog Remote I/O Product Description High-Speed Counters ■Multi-Circuit Electric Power Measuring Module Repeaters PC Interfaces HMI Peripheral Device Connection Positioning ●The current, voltage, Watt and Watt-hour of multiple low-voltage circuits are measured simultaneously with memorization, indication or transmission of measurement data. Realizes space-saving and reduced wiring work. ●Max.
Master/Local MELPRO-D Series D2 module: Approx. 300 (W) x 250 (H) x 200 (D), approx. 5 kg Number of occupied stations 1 station (remote device station) Positioning Peripheral Device Connection HMI CC-LinkCC-Link / LT Bridge Modules Option D1 module: Approx. 150 (W) x 250 (H) x 200 (D), approx.
Technical information Open Field Network 146
Software Option CC-LinkCC-Link / LT Bridge Modules RS-232 Interfaces Repeaters PC Interfaces HMI Peripheral Device Connection Positioning ● General Specifications/Glossary Others From page 154 Technical Information High-Speed Counters ● Overview of CC-Link Support Analog Technical Information From page 148 147 Remote I/O Master/Local
Master/Local Overview of CC-Link Analog Remote I/O Technical Information High-Speed Counters CC-Link (Version1.
Master/Local System Configuration T-branch Terminal block/connector Branch line Branch line Branch line Branch line Remote I/O / remote device station Remote I/O / remote device station Local station/ intelligent device station Remote I/O / remote device station Remote I/O / remote device station Remote I/O / remote device station Terminal resistor Local station/ Remote I/O / intelligent remote device device station station HMI Terminal resistor Local station/ intelligent device station Posi
Master/Local Overview of CC-Link Remote I/O Technical Information Analog Overview of CC-Link Positioning High-Speed Counters CC-Link Communication PLC CPU Master station Network parameters Network parameters Remote I/O station (station No. 1) Remote device station (station No. 2) Local station (station No. 3) Local station (station No.
Support Technical Information Others Software Option CC-LinkCC-Link / LT Bridge Modules RS-232 Interfaces Repeaters PC Interfaces HMI Peripheral Device Connection Positioning High-Speed Counters Analog Memo 151 Remote I/O Master/Local
Master/Local Overview of CC-Link Analog Remote I/O Technical Information High-Speed Counters Differences Between Versions 1.10 and 1.00 Positioning ■The specifications of CC-Link Version 1.10 and Version 1.00 differ with respect to the following two subjects: ●Maximum total cable length and cable length between stations ●Connection cable Specification List of CC-Link Version 1.00 (Differences from Version 1.
Master/Local Remote I/O Analog Overview of CC-Link High-Speed Counters Differences Between Versions 2 and 1 ■With Ver. 2, the cyclic data size can be increased through extended cyclic setting.
Master/Local General Specifications/Glossary Analog Remote I/O Technical Information High-Speed Counters ● General Specifications Positioning Item Specification ＊4 Operating ambient temperature 0 to 55 ℃ Storage ambient temperature − 20 to 75 ℃ Operating ambient humidity ＊4 ＊5 ＊5 Peripheral Device Connection Storage ambient humidity 10 to 90 %RH, no condensation allowed At intermittent vibration Conform to JIS B 3502, IEC61131-2 Vibration resistance HMI At continuous vibration Freq
Master/Local Remote I/O Analog High-Speed Counters Positioning Peripheral Device Connection HMI PC Interfaces Repeaters RS-232 Interfaces CC-LinkCC-Link / LT Bridge Modules Option Software A mode in which the PLC CPU cannot receive transient transmission requests from intelligent device stations. A mode in which the PLC CPU can receive transient transmission requests from intelligent device stations.
Support Open Field Network 156
Option CC-LinkCC-Link / LT Bridge Modules RS-232 Interfaces Repeaters PC Interfaces HMI Peripheral Device Connection ● CC-Link Partner Association (CLPA) Software Positioning From page 162 Others High-Speed Counters ● Overseas Support System Technical Information From page 158 Support Analog Support 157 Remote I/O Master/Local
Master/Local Overseas Support System Remote I/O Suppor t Analog North America FA Center High-Speed Counters Mitsubishi Electric Automation,Inc. Peripheral Device Connection Positioning 500 Corporate Woods Parkway Vernon Hills,IL60061 Tel 1-847-478-2100 1-847-478-2469（Japanese Account Division） Fax 1-847-478-0328 1-847-478-2396 Language:English/Japanese http://www.meau.com/ Europe FA Center Mitsubishi Electric Europe B.V.
7F-7,No.77,Zheng Bei 1st RD,Taichung City,Taiwan Tel 886-4-2258-1027 Fax 886-4-2252-0967 Beijing FA Center Gangling Electronic Technology Development (Beijing) Co.,Ltd. Industrial Automation Engineering Dept. upport ers Unit 917-918,9/F Office Tower Z, Henderson Center, 18 Jianguomennei Dajie,Dongchene District, Beijing 100005 China Tel 86-10-6518-8830 Fax 86-10-6518-8030 Languages: Chinese and English Shanghai FA Center KELING ELECTRIC (SHANGHAI) CO.,LTD. Subsidiary of Mitsubishi Electric Corp.
Master/Local Overseas Support System Remote I/O S uppor t Analog North America FA Center High-Speed Counters Mitsubishi Electric Automation,Inc. Positioning 500 Corporate Woods Parkway Vernon Hills,IL60061 Tel 1-847-478-2311(Direct) Fax 1-847-478-2253 Language:English/Japanese http://www.meau.com/ Peripheral Device Connection Europe FA Center Mitsubishi Electric Europe B.V.
Peripheral Device Connection Taipei FA Center Mitsubishi Electric Taiwan Co.,Ltd. 3FL.No.122 Wu Kung 2nd RD,Wu-Ku Hsiang,Taipei Hsien,Taiwan Tel 886-2-2299-3060 Fax 886-2-2298-1909 Languages: Chinese and English HMI Taichung FA Center Mitsubishi Electric Taiwan Co.,Ltd. Shanghai FA Center al System 2F Block5 Building Automation Instrumentation Plaza 103 Cao Bao Rd.
Master/Local Overseas Support System Remote I/O Suppor t Analog ■North/South America North America FA Center High-Speed Counters Mitsubishi Electric Automation,Inc. Chicago [MEAU (IL)] HMI Peripheral Device Connection Positioning 500 Corporate Woods Parkway,Vernon Hills,Illinois 60061,USA Tel 1-847-478-2500 Fax 1-847-478-2650 Mitsubishi Electric Automation,Inc. New Jersey [MEAU (NJ)] Mitsubishi Electric Automation,Inc.
3 FL.,No.122,Wu Kung 2nd Road,Wu-Ku Hsiang,Taipei Hsien,TAIWAN Tel 886-2-2299-2205 Fax 886-2-2298-1909 Ryoden Automation (Shanghai) Ltd. Shanghai No.8,Gong Yeh 16th Road,Taichung Industrial Park,Taichung City,TAIWAN Tel 886-4-2359-0688 Fax 886-4-2359-0689 Taichung 2F Block5 Building Automation Instrumentation Plaza, 103 Cao Bao Rd.Shanghai 200233,CHINA Tel 86-21-6484-9360 Fax 86-21-6484-9361 Kaohsiung 21F-3,110 San-Tuo 4 RD,Kaohsiung,TAIWAN Tel 886-7-330-6630 Fax 886-7-330-9720 Ryoden Automation Ltd.
Master/Local CC-Link Partner Association (CLPA) PC Interfaces HMI Peripheral Device Connection Positioning High-Speed Counters Analog Remote I/O Suppor t CC-Link Association backs partner members throughout the world for CC-Link and CC-Link/LT. What is the CC-Link Partner Association? What Does a Conformance Test Mean? The CC-Link Partner Association is an organization made up of CC-Link and CC-Link/LT product-development partner manufacturers in order to popularize CC-Link.
Master/Local Remote I/O Analog High-Speed Counters Positioning Global Support System RS-232 Interfaces Taiwan Option CC-LinkCC-Link / LT Bridge Modules ASEAN (Singapore) Contact Chuusanren-building, 3-12-13 Shirakabe, Higasi-ku,Nagoya Ciry, 461-0011, JAPAN TEL:81-52-936-6050 FAX:81-52-936-6005 e-mail address: cc-link@post0.mind.ne.jp Web site URL of CC-Link partner Assocoation http://www.cc-link.
Index Open Field Network 166
List of Models/Index From page 168 ● List of Models From page 172 ● Index of Models 167
List of CC-Link Related Product Models List of Models/Index ■List of CC-Link Related Product Models Product name Master/local module Model name Compact remote output module Page describing function and specification Master/local module for AnN/AnA/AnUCPUs ― 24 A1SJ61BT11 Master/local module for AnS/AnSH/AnUS/AnUSHCPUs ― 26 AJ61QBT11 Master/local module for QnACPU ― 20 A1SJ61QBT11 Master/local module for QnAS/QnASHCPUs ― 22 IP1XB 18 ― 28 New Master/local module for QCPU compatible
List of CC-Link Related Product Models Product name Compact remote I/O combined module Model name Specification Page describing function and specification AJ65FBTA42-16DT 8-point input, 24 VDC (+COM), 4 wire type, response time 1.5 ms 8-point output, 24 VDC (0.5 A), transistor output (sink type), 2 wire type, thin waterproof type IP67 58 AJ65FBTA42-16DTE 8-point input, 24 VDC (-COM)), 4 wire type, response time 1.5 ms 8-point output, 24 VDC (1.
List of CC-Link Related Product Models List of Models/Index ■List of CC-Link Related Product Models Product name Embedded input adapter Embedded output adapter Embedded I/O adapter Model name Specification IP display Page describing function and specification AJ65MBTL1N-16D New 16-point, 24 VDC(+COM), pin header type 44pins (2rows). embedded type, responce time 1.5ms ― 54 AJ65MBTL1N-32D New 32-point, 24 VDC(+COM), pin header type 62pins (2rows). embedded type, responce time 1.
List of CC-Link Related Product Models ● Optional Parts for I/O Modules ■One-Touch Connector Plug Specification Product name Model name A6CON-P214 One-touch connector plugs A6CON-P220 (a pack contains 20 pieces) A6CON-P514 A6CON-P520 Page describing function and specification Color of cover Applicable cable core wire size (mm) Applicable cable external size (mm) Transparent 0.14 to 0.2 (AWG#26 to 24) φ1.0 to 1.4 128 φ1.4 to 2.0 128 0.3 to 0.5 (AWG#22 to 20) φ1.0 to 1.4 128 φ1.4 to 2.
List of Models/Index Index of CC-Link Related Product Models Index of CC-Link Related Product Models ■Index of Models (in alphabetic order) Model name A 172 Page describing function and specification Model name Page describing function and specification C□□□-A□□D□ 145 CR1-571 138 24 CR2A-572 138 A1SJ61BT11 26 CR4-533 138 AJ65SBTB□-□ 36 AJ65BTB□-□ 36 EMU-C3P5 143 AJ65SBTC□-□ 48 EMU-C3P5-5A 143 AJ65VBTCU□-□ 48 EMU-C7P4-6A 144 AJ65MBTL1N-□ 54 AJ65FBTA□-16□ 58 FR-A5NC 134
Memo 173
Memo 174
Memo 175
Memo 176
Consumption tax is not included in the prices of all products listed in this catalog. Please be aware that consumption tax will be added to the price at the time of purchase. CC-Link Compatible Product Catalog For Safe Usage Open Field Network CC-Link Compatible Product Catalog Precautions in Usage ●Please read the manual before using the products listed in this catalog to ensure that they are used correctly.
