Specifications

Controllers
MHK1
Specifications
Function Description
ON/OFF
On/Off operation for a single
indoor unit
Operation Mode
Cool / Drying / Auto / Heat / Fan only
Available operation modes dependent upon
connected system.
Temperature Setting
Set temperature from 50° F – 87° F
depending on operation mode and
connected system
System Changeover
Deadband Value
2-8° F
Schedule Operation 5-2, 5-1-1
Fan Speed Setting
Hi/Mid-2/Mid-1/Low/Auto. Available fan
speed settings dependant upon connected
system.
Air Flow Direction Setting
Airflow angles: 100
o
- 80
o
- 60
o
- 40
o
and
oscillate. Available air flow direction settings
dependent upon connected system.
Permit/Prohibit Function
Individual prohibit operations for each
remote controller function (ON/OFF, Set
Temperature, and Mode).
Space Temperature Displays the measured space temperature.
Error Indication Displays error code.
Display Outside Temperature and
Humidity
Requires optional MOS1 Outside Air Sensor
Dimensions - (W x D x H)
Remote Controller: 5-3/16" x 1-1/2" x
3-9/16" Receiver: 3-1/4" x 1-5/16" x
6-7/16"
Operating Ambient Temperature
Remote Controller: 32 - 120° F
Receiver: -40 – 165° F
Operating Ambient Humidity
Remote Controller: 5 percent - 90 percent
RH (non-condensing)Receiver: 5 percent -
90% RH (non-condensing)
Power Supply
2 AA batteries (included)
27