Specifications

06
Auto Changeover on Heat Pump
Systems
(MUZ outdoor units)
Our heat pump systems sense whether a space needs
cooling or heating and automatically switch modes as
needed to maintain a consistent temperature within the
selected range of a single zone.
Quiet Operation
Do you hear that? No? You barely hear our systems
because Mitsubishi indoor units operate with barely a
whisper. For example:
Police siren 118 decibels
Circular saw 107 decibels
Vacuum cleaner 74 decibels
Library reading room 33 decibels
Whisper-tone voice 35 decibels
  
(at low speed)
Did you hear that? We hope you did.
System Control in the Palm of Your Hand
Mitsubishi Electric offers a comprehensive remote controller
that controls temperature, fan speed and more. Choose from
four modes: COOL, HEAT, AUTO and DRY. The controller
also has a 12-hour ON/OFF timer for one-button control of
your personal comfort.
Warm Air, No Drafts
Our hot-start heat pump technology provides warmth
from the beginning. The fan increases in speed as
the coil is warmed, reducing drafts so when you want
warm air, you’ll get it.
Advanced Control Technology
Through Mitsubishi’s advanced controls technology
the indoor unit is powered by the outdoor unit. Three
polarity sensitive wires plus a ground conductor run
from the outdoor to the indoor unit, providing both
power and communication. An advanced wireless
remote control is standard on all ductless models.
An optional wired on-the-wall controller is
available for wall-mounted indoor units on
INVERTER systems (also requires MAC-397
adapter) while standard on ducted units.
healthier air
comfort
set it and forget it
Easy to Maintain
With easily accessible filters, little or no ductwork to
clean, and uncomplicated wiring connection points
between the indoor and outdoor units, Mitsubishi
systems rely on minimal maintenance, providing
another level of comfort.
whisper quiet
Superior Operation