Specifications

i-see
™
Sensor Optional Accessory
In addition to the return air temperature, the PLA-A**BA four-way ceiling cassette
with the field-installed i-see sensor measures the floor temperature in real time,
observing the room vertically for better management of sensible temperature
(temperature felt by the occupant). The i-see sensor measures the
infrared rays generated from the surrounding wall and floor surface at an
angle of 360°. The infrared ray energy is converted into a temperature
value. The i-see sensor rotates 90° slowly in five-second intervals
for correct measurement of temperature to cover the full floor
space. When combined with the auto fan speed mode, air can be
directed to the farthest corners of the room for enhanced
temperature coverage.
26
Mitsubishi System Technologies:
indoor unit specific technologies
Wider Air Stream
Longer air outlets deliver wider air streams for improved air
distribution and energy savings. This feature means quieter air
delivery with fewer drafts and great overall cooling and
heating coverage.
Independent Vane Motor Control
Each of the four vanes can be set by the wired remote controller
to operate independently to match the room layout. Specific vane
settings include five fixed directions plus swing.
Auto Wave Feature (HEATING mode)
In the HEATING mode each air outlet vane operates independently,
distributing warm air in multiple directions for the best in room heating.
Previous Model
PLA-A**ABA
Air outlet: 16 - 3/16 In.
Air outlet: 19 - 11/16 In.
PLA ceiling-recessed model
i-see sensor detail