Unit installation

May 2009 Application Note 1016

P a g e | 4

M-Series

When the M-Series units are to be integrated into the CITY MULTI® network with the

Centralized Controllers the following components are needed:

• MAC-399IF – M-NET converter (per indoor unit)

• AG-150/GB-50/GB-24 – Centralized Controller

When the M-Series units are to be integrated into the CITY MULTI® network with TG-

2000 the following components are needed:

• MAC-399IF – M-NET converter (per indoor unit)

• AG-150/GB-50 – Centralized Controller

• TG-2000 software

• Dedicated PC – Runs TG-2000 software

• SW-Mon/SW-Sch – Monitoring and Scheduling software (minimum software

required) for each connected Centralized Controller

• SW-Charge – Tenant Billing software for each connected Centralized Controller

(optional)

When the M-Series units are to be integrated into LonWorks® network the following

components are needed:

• MAC-399IF - M-NET converter (per indoor unit)

• AG-150/GB-50 – Centralized Controller (recommended)

• LMAP03U – LonWorks® Interface

When the M-Series units are to be integrated into the BACnet® network the following

components are needed:

• MAC-399IF – M-NET converter (per indoor unit)

• AG-150/GB-50 – Centralized Controller

• SW-BACnet (PAC-YTG31CDA) – needed for each connected Centralized

• Controller

• BACnetIF software – located on the CITY MULTI Controls Network CD

• (CMCN CD)

• Dedicated PC – PC runs BACnetIF software, must have 2 LAN cards, handles up

to 10 Centralized Controllers

Due to continuing improvement, above specification may be subject to change without notice.

2013 P-Series and M-Series - Application Notes (June 2013)

APP-40