Unit installation

March 2008 Application Note 1008
©2012 Mitsubishi Electric US, Inc.
P a g e | 3
Note: All wiring shall comply with local electrical codes.
CONNECTING WIRES AND CONNECTING GROUND WIRE
 Use a solid conductor AWG14 or stranded conductor
AWG18, AWG16, or AWG14.
 Use doubled insulated copper wire with 300 volt
insulation.
 Use copper conductors only.
 Follow national and local electrical code.
POWER SUPPLY CABLE AND GROUND WIRE
 Use solid or stranded conductor AWG14 wire.
 Use copper conductors only.
 Follow national and local electrical code.
Due to continuing improvement, above specification may be subject to change without notice.
2013 P-Series and M-Series - Application Notes (June 2013)
APP-20