www.mrslim.
® Mr. Slim Splitductless Systems Comfort is a concept many of us notice Redefining Comfort extremely comfy. At Mitsubishi Electric only when we’re either uncomfortable or HVAC Advanced Products Division comfort is all we think about, and our industry-leading Mr. Slim split-ductless cooling and heating systems reflect that R410A thinking. At home or at work our Mr. Slim systems are designed to make any space inviting. Maybe your home has a room that’s M-Series Indoor Unit always too hot or too cold.
What is Mr. Slim® Splitductless Technology? Home Solutions For decades split-ductless air-conditioning systems have been the quiet solution for cooling and heating problems around the world. Our quiet and powerful Mr. Slim systems have three main components: an indoor unit, outdoor unit, and remote Indoor Unit controller. These units are easily connected by refrigerant lines running through a small three-inch opening in the wall or ceiling.
uncomfortably hot or cold room in an existing building comfortable again. Perhaps you are remodeling or renovating an older home or business built before ducted air conditioning was available. Because there is no ductwork to run, Mr. Slim split-ductless systems are both plaster wall and brick facade friendly so there’s no need to compromise the integrity of your home or office just to make each room comfortable.
INDEX P-SERIES: 12,000-42,000 Btu/h INVERTER TECHNOLOGY Pages 06-07 Select Residential or Varied Commercial Pages 16-17 M-SERIES: 9,000-30,000 Btu/h Wired Remote, Benefits, and Outdoor Unit Comparison Page 17 Residential and Select Commercial Air Conditioners and Heat Pumps Pages 08-09 PKA WALL-MOUNTED SERIES: 12,000-34,200 Btu/h Air Conditioners and Heat Pumps with Wired and Wireless Hand-held Remote Controllers Pages 18-20 Wireless Remote and Benefits Page 09 MS/MSY/MSZ SINGLE-ZONE, WALL-MOUNTED SE
Mr.Slim® INVERTER INVERTER-DRIVEN COMPRESSOR TECHNOLOGY INVERTER Technology for Superior Year-round Comfort and Performance Select straight-cool and all heat pump outdoor units employ Mitsubishi Electric’s INVERTER-driven compressor technology (Variable Frequency Drive) to provide exceptional, high-speed cooling and heating performance. Thanks to high rotation speeds, desired temperatures are reached more quickly than with conventional systems. So you can enjoy your ideal level of comfort without delay.
High-speed Cooling and Heating High rotation compressor speeds cool and heat a room quickly, saving both energy and cash. The compressor speed is controlled to maximize efficiency, changing speeds according to the cooling and heating load of a room. Extra Energy Savings For optimum performance INVERTER technology delivers Optimum Comfort Year-round only the energy needed to satisfy the cooling and heating load of a room, thereby reducing energy consumption.
Mr.Slim® M-SERIES RESIDENTIAL AND SELECT COMMERCIAL Small Size, Big Performance While all of our Mr. Slim units are compact and lightweight, the M-Series is designed specifically for tight spaces. But don’t be fooled. The powerful M-Series delivers plenty of cool or warm air to almost any size room. And unlike window units, the Mr. Slim indoor unit’s small size, neutral color, and mounting position mean it blends in well. Lifestyle photo courtesy of Mitsubishi Digital Electronics America, Inc.
Wireless Remote Controller Operation Select (Heat, Cool, Auto, Dry) Econo Cool Fan Speed Reset Timer Vane Control Clock Set Sliding Cover HR./MIN. (Time Set) Wireless Remote Controller Detail Wide Vane MSY(Z)-A24NA (only) Optional wired remote controller available Features Powerful: Faster Cooling or Heating Benefits INVERTER TECHNOLOGY Maximizes energy savings by making sure only the energy needed to cool or heat an area is used.
Mr.Slim® Mr.Slim® MS/MSY MSZ COOLING ONLY WALL-MOUNTED SERIES HEAT PUMPS INVERTER-DRIVEN WALL-MOUNTED SERIES Air Conditioners Heat Pumps (MSY Models Only) MS and MSY Models 9,500 to 22,000 Btu/h Capacity MSZ Model 9,000 to 22,000 Btu/h Capacity M-Series W i re l e s s R e m o t e C o n t ro l l e r cold or warm air from other areas in M-Series W i re l e s s R e m o t e C o n t ro l l e r What is comfort? Comfort is a home the home.
Total, Healthy Comfort The POWERFUL mode is available to cool or heat any desired space quickly by lowering the set temperature in cooling mode or raising the set temperature in heating mode by seven degrees. It increases the fan speed for 15 minutes. Auto changeover maintains consistent temperature in a room by automatically sensing whether the space needs cooling or heating.
SPECIFICATIONS FOR MS/MSY COOLING-ONLY M-SERIES (R410A) INDOOR UNIT Color Power Supply V/Phase/Hz Max. Fuse Size (Time Delay) A MS-A09WA MS-A12WA MSY-A15NA MSY-A17NA MSY-A24NA White White White White White 115/1/60 115/1/60 208-230/1/60 208-230/1/60 208-230/1/60 15 15 15 15 15 Min. Circuit Ampacity A 1.2 1.2 1.0 1.0 1.
SPECIFICATIONS FOR MSZ HEAT PUMP M-SERIES (R410A) INDOOR UNIT MSZ-A09NA MSZ-A12NA MSZ-A15NA MSZ-A17NA MSZ-A24NA Color Power Supply Max. Fuse Size Min. Circuit Ampacity Airflow Lo-Med-Hi (Heat) Airflow Lo-Med-Hi (Cool) Airflow Lo-Med-Hi (Cool) Moisture Removal Sound Level - Cooling Sound Level - Heating Cond. Drain Connection Indoor Unit Width Indoor Unit Depth Indoor Unit Height Weight Fan Motor White 208-230/1/60 15 1.2 159-222-307 152-229-307 134-205-275 2.
Mr.Slim® MXZ INVERTER-DRIVEN MULTI-ZONE HEAT PUMP SYSTEMS If you’re looking for a complete comfort solution for several different rooms, the MXZ multi-zone system is the right choice for you. You can use up to 15 different combinations of indoor and outdoor units so the system is flexible enough to conform to your particular cooling and heating needs. Powerful, Efficient, and Versatile Reap the benefits of our latest INVERTERdriven technology.
SPECIFICATIONS FOR MXZ HEAT PUMP MXZ SERIES (R410A) OUTDOOR UNIT Capacities Capacities Capacities Power Consumption Rated Power Consumption Rated Power Consumption Rated MXZ-2A20NA MXZ-3A30NA Cooling MBH *1 (Range) Heating 47º MBH *1 (Range) Heating at 17° *2 20 (7.8~20) 22 (8.5~22) 28.4 (12.6~28.4) 28.6 (11.4~36) 14.5 18.
Mr.Slim® P-SERIES LARGE RESIDENTIAL, VARIED COMMERCIAL, AND INSTITUTIONAL The Mr. Slim P-Series delivers flexible and convenient cooling and heating solutions to almost any commercial, institutional, or large residential application. Choose from small, quiet indoor and outdoor units that operate with the increased efficiency you need.
Hot-start System Mr. Slim heat pumps use our Hot-start technology to provide warmth from the beginning by ramping up fan speed as the coil warms. So when you want warm air without annoying drafts, that’s what you’ll get. Installation Service and Maintenance Ease P-Series outdoor units are designed with easy service and maintenance in mind. Maintenance points are located behind easy-access panels, to make installation Features and service a breeze for a trained technician.
Mr.Slim® PKA (GA/GAL,FA/FAL) WALL-MOUNTED SERIES PKA Indoor Unit (Same indoor unit is used for both cooling and heat pump systems.) 12,000 to 34,200 Btu/h Capacity The PKA-Series fills larger spaces with substantial cooling and heating from a compact, wall-mounted package. Walk PKA-L Series C o n t ro l l e r PA R - 2 1 M A A C o n t ro l l e r These Mr. Slim systems come with either a wired (GA/FA) or wireless (GAL/FAL) remote controller that puts you in command of your personal comfort.
SPECIFICATIONS FOR PKA COOLING-ONLY P-SERIES (R410A) GA/FA = Wired controller GAL/FAL = Wireless controller BS = Seacoast Protection Indoor Unit PKA-A12GAL Model Name Outdoor Unit Cooling *1 Power supply Voltage Rated Capacity Min.
SPECIFICATIONS FOR PKA HEAT PUMP P-SERIES (R410A) GA/FA = Wired controller GAL/FAL = Wireless controller BS = Seacoast Protection Indoor Unit Model Name Outdoor Unit Cooling *1 Heating *1 Heating at Low Ambient *2 Power supply Voltage Indoor Unit Rated Capacity Min. Capacity Total Input Energy Efficiency Moisture Removal SHF Rated Capacity Min.
Mr.Slim® PCA CEILING-SUSPENDED SERIES PCA Indoor Unit (Same indoor unit is used for both cooling and heat pump systems) 24,000 to 42,000 Btu/h Capacity Powerful cooling and heating performance is what the PCA-Series is all about. This ceiling-suspended unit delivers enough cold or hot air to make any space more comfortable. Manually-adjusted oversized swing louvers direct the airflow left or right, quietly covering the entire space.
SPECIFICATIONS FOR PC COOLING-ONLY P-SERIES (R410A) BS = Seacoast Protection Indoor Unit Model Name Cooling *1 Power supply Voltage Indoor Unit Outdoor Unit Rated Capacity Min.
SPECIFICATIONS FOR PC HEAT PUMP P-SERIES (R410A) BS = Seacoast Protection Indoor Unit PCA-A24GA PCA-A30GA PCA-A36GA PCA-A42GA Outdoor Unit PUZ-A24NHA-BS PUZ-A24NHA PUZ-A30NHA-BS PUZ-A30NHA PUZ-A36NHA-BS PUZ-A36NHA PUZ-A42NHA-BS PUZ-A42NHA Model Name Cooling *1 Heating *1 Heating at Low Ambient *2 Power supply Voltage Indoor Unit Rated Capacity Min. Capacity Total Input Energy Efficiency Moisture Removal SHF Max. Capacity Rated Capacity Min.
Mr.Slim® PLA CEILING-RECESSED SERIES PLA Indoor Unit (Same indoor unit is used for both cooling and heat pump systems) 12,000 to 42,000 Btu/h Capacity If there’s at least a foot of space for you. These models combine Auto Cooling/heating Changeover powerful cooling and heating in an Heat pump systems will elegant cassette design that recesses automatically switch back and into the ceiling.
SPECIFICATIONS FOR PL COOLING-ONLY P-SERIES (R410A) BS = Seacoast Protection Indoor Unit PLA-A12AA PLA-A18AA Outdoor Unit PUY-A12NHA-BS PUY-A12NHA PUY-A18NHA-BS PUY-A18NHA 12,000 6,000 1,260 13 1.8 0.83 18,000 8,000 1,870 13.2 1.5 0.91 Model Name Cooling *1 Power supply Voltage Indoor Unit Rated Capacity Btu/h Min.
SPECIFICATIONS FOR PL HEAT PUMP P-SERIES (R410A) BS = Seacoast Protection Indoor Unit Model Name Outdoor Unit PLA-A18AA PUZ-A18NHA-BS PUZ-A18NHA PLA-A24AA PUZ-A24NHA-BS PUZ-A24NHA 18,000 8,000 1,870 13.2 1.5 0.91 19,000 8,000 1,620 10 / 7.8 13,000 1,400 24,000 12,000 2,500 13.4 5 0.77 26,000 12,000 2,570 8.5 / 6.8 16,000 2,200 15 25 Rated. Capacity Btu/h Min. Capacity Btu/h Total Input W Cooling *1 Energy Efficiency SEER Moisture Removal Pints/h SHF Rated Capacity Btu/h Min.
GENERAL SPECIFICATIONS GENERAL SPECIFICATIONS MS/MSY/MSZ/MXZ RATING CONDITIONS REFRIGERANT LINE LENGTH FLARE/FLARE INDOOR INTAKE AIR TEMPERATURE COOLING HEATING OUTDOOR INTAKE AIR TEMPERATURE Indoor Unit Outdoor Unit Length in feet Height in feet MAXIMUM 95º F DB, 71º F WB 115º F DB MSA09WA MUA09WA 65 35 MINIMUM 67º F DB, 57º F WB 67º F (MS) / 14º F (MSY/MSZ/MXZ) MSA12WA MUA12WA 65 35 MAXIMUM 80º F DB, 67º F WB 75º F DB, 65º F WB MSYA15NA MUYA15NA 65 40 MSYA17NA MUYA17NA 65
Provides personalized comfort control for every room. Mitsubishi Electric Shizuoka Works acquired ISO 9001 certification under Series 9000 of the International Standard Organization (ISO), based on a review of quality warranties for the production of airconditioning equipment. The plant also acquired environmental management system standard ISO 14001 certification.
