Instruction manual

3 - 14

3. SIGNALS AND WIRING

(3) Insertion of cable into 54928-0610 54927-0510 and 54928-0310 (Molex)

How to connect a cable to the servo amplifier power supply connector is shown below.

(a) When using the supplied cable connection lever

1) The servo amplifier is packed with the cable connection lever 54932-0000 (Molex).

[Unit: mm]

([Unit: in])

3.4

(0.134)

MXJ

54932

20.6 (0.811)

10 (0.394)

4.9

(0.193)

6.5

(0.256)

(0.118)

4.7

(0.185)

7.7 (0.303)

3.4

(0.134)

4.9 (0.193)

2) Cable connection procedure

1) Attach the cable connection lever to the housing.

(Detachable)

2) Push the cable connection lever in the direction

of arrow.

3) Hold down the cable connection lever and insert

the cable in the direction of arrow.

4) Release the cable connection lever.

Cable connection lever