Instruction manual

12 - 50
12. OPTIONS AND AUXILIARY EQUIPMENT
12.16 EMC filter (Recommended)
For compliance with the EMC directive of the EN Standard, it is recommended to use the following filter: Some
EMC filters are large in leakage current.
(1) Combination with the servo amplifier
Recommended filter
Servo amplifier
Model Leakage current [mA]
Mass [kg]([lb])
MR-J3-10A to MR-J3-100A
MR-J3-10A1 to MR-J3-40A1
(Note) HF3010A-UN 5 3 (6.61)
MR-J3-250A MR-J3-350A (Note) HF3030A-UN 5 5.5 (12.13)
MR-J3-500A MR-J3-700A (Note) HF3040A-UN 1.5 6.0 (13.23)
Note. Soshin Electric A surge protector is separately required to use any of these EMC filters. (Refer to the EMC Installation
Guidelines.)
(2) Connection example
L
1
L
2
L
3
L
11
L
21
NFB
1
2
3
4
5
6
E
EMC filter Servo amplifier
(Note) Power supply
Note. For 1-phase 230VAC power supply, connect the power supply to L
1
,L
2
and leave L
3
open.
There is no L
3
for 1-phase 100 to 120VAC power supply.
MC
(3) Outline drawing
HF3010A-UN
[Unit: mm(in)]
M4
IN
3-M4
65 4
(2.56 0.16)
41 (1.61)
4-5.5 7
258 4 (10.16 0.16)
273 2 (10.75 0.08)
288 4 (11.34 0.16)
300 5 (11.81 0.20)
3-M4
85 2
(3.35 0.08)
32 2
(1.26 0.08)
110 4 (4.33 0.16)