Specifications

3-42
Instruction
Code
Instruction Write Data (RW
w3
) Contents (PLC to Servo amplifier)
8800
to 881F
Writes the point
table deceleration
time constant data
to RAM
Writes the deceleration time constant data of point table No. 00 to
31 to the RAM. This setting is erased at power-off.
Deceleration time constant data: Make setting after
conversion into hexadecimal.
The under 2 digits (88
) of the instruction code No. correspond to
the point table No. converted into decimal.
Instruction
Code
Instruction Write Data (RW
w3
) Contents (PLC to Servo amplifier)
8900
to 891F
Writes the point
table dwell time
data to RAM
Writes the dwell time data of point table No. 00 to 31 to the RAM.
This setting is erased at power-off.
Dwell time data: Make setting after conversion into
hexadecimal.
The under 2 digits (89
) of the instruction code No. correspond to
the point table No. converted into decimal.
Instruction
Code
Instruction Write Data (RW
w3
) Contents (PLC to Servo amplifier)
8A00
to 8A1F
Writes the point
table auxiliary
function data to
RAM
Writes the auxiliary function data of point table No. 00 to 31 to the
RAM. This setting is erased at power-off.
Auxiliary function data: Make setting after conversion
into hexadecimal.
The under 2 digits (8A
) of the instruction code No. correspond to
the point table No. converted into decimal.