Specifications

3-9
(1) Operation mode
The MR-J2S-CP-S084 has the following operation modes.
1) Test operation mode
A servo motor is run with the amplifier front LED buttons.
2)
CC-Link
operation mode
A servo motor is run with a PLC program via the MR-J2S-T01 (CC-Link interface unit).
(2) Operation mode switching
(a) Operation mode switching conditions
Before operation mode switching, check that:
1) The servo motor is at a stop.
2) The forward or reverse rotation signal is OFF.
(b) Operation mode switching method
When switching from the test operation to the
CC-Link
operation, power off, then on the servo
amplifier to leave the test operation mode.
Symbol Switching Type Switching Method
A CC-Link operation mode
Test operation mode
Select the test operation mode with the
amplifier front LED button.
A
CC-Link
operation
mode
Test operation
mode