Specifications
1-1
- CONTENTS -
1. OVERVIEW
2. SPECIFICATION LISTS
3. CC-Link COMMUNICATION FUNCTION
4. POSITIONING FUNCTION
5. CONNECTION DIAGRAM
6. TERMINAL EXPLANATION
7. OPERATION TIMINGS
8. OPERATION MODES
9. DISPLAY
10. PARAMETERS
11. PROTECTIVE FUNCTIONS
12. OUTLINE DRAWING
1. OVERVIEW
This specification describes the CC-Link equivalent positioning function built-in servo amplifier MR-J2S-
CP-S084 and CC-Link interface unit MR-J2S-T01.
Connected with the CC-Link interface unit MR-J2S-T01, the CC-Link equivalent positioning function
built-in servo amplifier MR-J2S-
CP-S084 can control and monitor up to 42 axes of servo amplifiers
from the PLC side.
Positioning operation is performed on the basis of the positioning information, such as positioning data
(target positions), motor speeds and acceleration/deceleration time constants, set to point tables.
<Model>
The servo amplifier model is defined as follows.
MR-J2S-
MR-J2S-MR-J2S-
MR-J2S- CP-
CP-CP-
CP-S084
S084S084
S084
The CC-Link interface unit model is defined as follows.
MR-J2S-
MR-J2S-MR-J2S-
MR-J2S-T01
T01T01
T01
Indicates that the model conforms
to this specification.
Indicates that the model conforms
to this specification.