Specifications

3
BCN-B11127-478*
2. Standard specifications
2.1 Servo amplifier standard specifications
Servo Amplifier
MR-J2S-
CP-S099
Item
10 20 40 60 70 100 200 350 500 700
Voltage/frequency
3-phase 200 to 230VAC, 50/60Hz or 1-phase
230VAC, 50/60Hz
3-phase 200 to 230VAC, 50/60Hz
Permissible voltage fluctuation
3-phase 200 to 230VAC:
170 to 253VAC
1-phase 230VAC: 207 to 253VAC
3-phase 170 to 253VAC
Permissible frequency fluctuation Within 5%
Power supply
Power supply capacity Refer to Section12.2
System Sine-wave PWM control, current control system
Dynamic brake Built-in
Protective functions
Overcurrent shut-off, regenerative overvoltage shut-off, overload shut-off (electronic
thermal relay), servo motor overheat protection, encoder error protection, regenerative
brake error protection, undervoltage, instantaneous power failure protection, overspeed
protection, excessive error protection
Structure Self-cooled, open (IP00) Force-cooling, open (IP00)
[ ] 0 to 55 (non-freezing)
Operation
[
] 32 to 131 (non-freezing)
[ ] 20 to 65 (non-freezing)
Ambient
temperature
Storage
[
] 4 to 149 (non-freezing)
Operation Ambient
humidity
Storage
90%RH or less (non-condensing)
Ambient
Indoors (no direct sunlight)
Free from corrosive gas, flammable gas, oil mist, dust and dirt
Altitude Max. 1000m (3280ft) above sea level
5.9 [m/s
2
] or less
Environment
Vibration
19.4 [ft/s
2
] or less
[kg] 0.7 0.7 1.1 1.1 1.7 1.7 2.0 2.0 4.9 7.2
Weight
[lb] 1.5 1.5 2.4 2.4 3.75 3.75 4.4 4.4 10.8 15.87