Service manual

DISASSEMBLY INSTRUCTIONS

MR-C375C-A

MR-C375CL-A

MR-C405C-A

MR-C405CL-A

Plug out before work.

Check the automatic ice-maker by pressing ice making stop switch.

In assembling & disassembling parts use several kind of screws and rivets. Do not mistake to use them.

1. Detachment Control PCB parts Photo 1

Compressor cover

(1) Detach 7 pcs. of compressor cover screws behind the

refrigerator. (Photo 1)

Elect cover

(2) Detach 4 pcs. of Elect cover screws. (Photo 2)

Elect attach Photo 2

(3) Disconnect the connector and remove Elect attach. (Photo 3)

PCB (Refcon assy)

(4) Remove the catch of elect attach to release the PCB plate.

(Photo 3)

Photo 3

Caution on assembly

[1] Firmly connect the lead wire and the connector. Ensure the

wire are not pinched.

[2] Please use the new material of sealing insulation when

re-attach.

2. Detachment Lamp cover parts Photo 4

(1) Remove parts inside the refrigerator Shelf 1,2,3 shelf

Lamp cover inside the refrigerator

(1) Push up the lower catch, and pull the room light cover toward you.

(2) Detach two upper catches to take out the cover (Photo 4)

OPERATING PROCEDURE PHOTOS

Catch

Stainless steel

4 x12 (Black)

With metal washer

Rivet

A B

Rivet

Lamp cover

7 fixing screws

Compressor

cover

4 fixing screws

Elect cover

Elect attach

PCB

Catch