Instruction manual

2 - 46
2 SYSTEM CONFIGURATION
Power supply modules specifications (Q63P, Q64P, Q64PN)
Item Q63P Q64P Q64PN
Base loading position Q series power supply module loading slot
Applicable base unit Q35DB, Q38DB, Q312DB, Q63B, Q65B, Q68B, Q612B
Input power supply
24VDC (+30%/-35%)
(15.6 to 31.2VDC)
100 to 120VAC/200 to
240VAC (+10%/-15%)
(85 to 132VAC/170 to
264VAC)
100 to 240VAC (+10%/-15%)
(85 to 264VAC)
Input frequency —— 50/60Hz ±5%
Input voltage distortion factor —— 5% or less
Max. input apparent power 45W 160VA
Inrush current
100A 1ms or less
(at 24VDC input)
20A 8ms or less
(Note-4)
Rated output current
5VDC 6A 8.5A
24VDC —— ——
Overcurrent
protection
(Note-1)
5VDC 6.6A or more 9.9A or more
24VDC ——
Overvoltage
protection
(Note-2)
5VDC 5.5 to 6.5V
24VDC ——
Efficiency 70% or more
Permissible instantaneous power off
time
(Note-3)
10ms or less (at 24VDC input) 20ms or less
Dielectric withstand voltage
500VAC across primary and
5VDC
Across inputs/LG and outputs/FG
2,830VAC rms/3 cycles
(Altitude : 2000m (6561.68ft.) )
Insulation resistance
10M
or more by insulation
resistance tester
Across inputs and outputs (LG and FG separated), across
inputs and LG/FG, across outputs and LG/FG 10M
or more by
insulation resistance tester (500VDC)
Noise immunity
• By noise simulator of
500Vp-p noise voltage, 1
µ
s
noise width and 25 to 60Hz
noise frequency
• By noise simulator of 1,500Vp-p noise voltage, 1
µ
s noise
width and 25 to 60Hz noise frequency
• Noise voltage IEC61000-4-4, 2kV
Operation indicator
LED indication
(Normal: ON (Green),
Error: OFF)
LED indication
(Normal: ON (Green),
Error: OFF)
(Note-5)
LED indication
(Normal: ON (Green),
Error: OFF)
Fuse Built-in (Unchangeable by user)
Contact
output
section
Application ERR contact
Rated switching
voltage/current
24VDC, 0.5A
Minimum switching load 5VDC, 1mA
Response time OFF to ON: 10ms or less. ON to OFF: 12ms or less
Life time
Mechanical: 20 million times or more
Electrical: 100 thousand times at rated switching voltage/current or more
Surge suppressor None
Fuse None
Terminal screw size M3.5 screw
Applicable wire size 0.75 to 2mm
2
Applicable crimping terminal RAV1.25 to 3.5, RAV2 to 3.5
Applicable tightening torque 0.66 to 0.89 N•m
Exterior dimensions[mm(inch)]
98(H) × 55.2(W) × 90(D)
(3.86(H) × 2.17(W) × 3.54(D))
98(H) × 55.2(W) × 115(D)
(3.86(H) × 2.17(W) × 4.53(D))
Mass [kg] 0.33 0.40 0.47