Instruction manual

7 - 1
7
7 EMC DIRECTIVES
7. EMC DIRECTIVES
Compliance to the EMC Directive, which is one of the EU Directives, has been a legal
obligation for the products sold in European countries since 1996 as well as the Low
Voltage Directive since 1997.
Manufacturers who recognize their products are compliant to the EMC and Low
Voltage Directives are required to declare that print a "CE mark" on their products.
5VDC 1.30A
PASSED
SERIAL
M16349999
0026924699D0
MODEL
MOTION CONTROLLER
US LISTED
U
L
80M1 IND. CONT. EQ.
C
MITSUBISHI
KCC-REI-MEK-TC510A692051
DATE:2011-06
MITSUBISHI ELECTRIC CORPORATION
MADE IN JAPAN
Q173DCPU-S1
See Q173DCPU-S1 Instruction manual.
KCC-REI-MEK-
TC510A792G61
DATE:2011-11
See Q173DSCPU Instruction manual.
MADE IN JAPAN
N2X234999
SERIAL
5VDC 1.75A
Q173DSCPU
MODEL
PASSED
MOTION CONTROLLER
MITSUBISHI ELECTRIC CORPORATION
MITSUBISHI
IND. CONT.EQ.
US LISTED
U
L
C
80M1
CE mark
CE mark
(1) Authorized representative in Europe
Authorized representative in Europe is shown below.
Name : Mitsubishi Electric Europe B.V.
Address : Gothaer strase 8, 40880 Ratingen, Germany
7.1 Requirements for Compliance with the EMC Directive
The EMC Directive specifies that products placed on the market must be so
constructed that they do not cause excessive electromagnetic interference (emissions)
and are not unduly affected by electromagnetic interference (immunity)".
Section 7.1.1 through Section 7.1.4 summarize the precautions on compliance with the
EMC Directive of the machinery constructed with the Motion controllers.
These precautions are based on the requirements and the standards of the regulation,
however, it does not guarantee that the entire machinery constructed according to the
descriptions will comply with above-mentioned directive. The method and judgement
for complying with the EMC Directive must be determined by the person who construct
the entire machinery.