Specifications

Software installation Start-up and trial operation
Motion controller Q170MCPU/ Q172DCPU/ Q173DCPU 4 - 5
Operating system installation
햲 Power off the motion controller.
햴 Power on the motion CPU. After the power is turned on, the 7-segment LED displays "INS", and
the motion CPU gets into the installation mode.
햸 Insert the CD-ROM with the motion controller OS into the CD-ROM drive of the personal compu-
ter.
햳 Set the rotary switch 1 (on the motion con-
troller) to "A" to set the installation mode.
햵 Select "Start" - "All Programs" - "MELSOFT
Application" - "MT Works2" - "Install".
햶 The installation screen appears.
Select "Online" - "Transfer Setup" to set the
communication setup screen. Further de-
tails in the section "Transfer setup" (section
5.2.1) of this quick-start guide.
햷 Click the button Install Motion Controller
OS. When the motion controller OS has al-
ready been installed, the version is dis-
played in addition to the CPU type.
햹 Click the button Browse and specify the
OS's source folder. The CPU type and OS
version appear.
햺 Click the button Execution. The installation
is started.
Rotary switch 1