Specifications

Module mounting into cabinet Mounting and wiring
Motion controller Q170MCPU/ Q172DCPU/ Q173DCPU 3 - 5
Removal of the module from Q3첸B and Q6첸B
b
WARNING:
● Completely turn off the externally supplied power used in the system before removing the
module. Not doing so could result in electric shock or damage to the product.
● When the module fixing screw is used, always remove the module by removing the module
fixing screw and then taking the module fixing latch off the module fixing hole of the base
unit. Attempting to remove the module by force may damage the module fixing latch.
Fig. 3-4: Removal of the module
Module
connector
Module
Base unit
Support the module with both hands and se-
curely press the module fixing hook with your
finger.
Pull the module based on the supporting point
of module bottom while pressing the module
fixing hook.
While lifting a module, take off the module fixing
projection from the module fixing hole.