Specifications

Mounting and wiring Module mounting into cabinet
3 - 4
Installation of the module on Q3첸B and Q6첸B
 Securely insert the module fixing protection into the module fixing hole so that the latch is not
misaligned.
 Using the module fixing hole as a fulcrum, push the module in the direction of arrow to install it
into the base unit.
 Make sure that the module is installed in the base unit securely.
 When using module in a place where there is large vibration or impact, install it by the unit fixing
screws (M3 x 12).
b
WARNING:
● Completely turn off the externally supplied power used in the system before installing the
module. Not doing so could result in electric shock or damage to the product.
● When installing the module, always insert the module fixing projection into the module
fixing hole of the base unit. If the module is forcibly installed without the latch being inserted,
the module connector and module will be damaged.
Fig. 3-3: Installation of the module
Module
connector
Module
Module fixing
hook
Base unit
Base unit
Module loading lever
Module fixing
hole
Module fixing
hook