Specifications

Module mounting into cabinet Mounting and wiring
Motion controller Q170MCPU/ Q172DCPU/ Q173DCPU 3 - 1
3 Mounting and wiring
3.1 Module mounting into cabinet
3.1.1 Mounting of Q170MCPU
Keep the clearances shown below between the top/bottom faces of the module and other structures
or parts to ensure good ventilation and facilitate module replacement.

Fit the Motion controller at the left side of the servo amplifier.
Fig. 3-1: Module mounting position
Top of panel or wiring duct
욷40 mm
Servo amplifier
Motion
controller

욷90 mm
Panel
욷30 mm
욷10 mm
욷30 mm
욷100 mm
135 mm
Door