Instruction manual

7 - 24

7 TRANSMISSION MODULE

< Example 2 > Same synchronous encoder is connected to auxiliary

input axis

Set all the clutches connected to the same synchronous

encoder set to the external input mode. (Also set clutch

ON/OFF devices to the same setting.)

Set both to external

input mode. (Also set

clutch ON/OFF device

to the same setting.)

Synchronous encoder No.1Synchronous encoder No.1

< Example 3 > Same synchronous encoder is connected to a drive

axis and auxiliary input axis

Set all the connected clutches to the external input mode.

(Refer to examples 1 and 2)

Set all to external input mode.

nchronous encoder No.1

Synchronous encoder No.1