Instruction manual

6 - 154
6 POSITIONING CONTROL
(f) Parameter setting
The automatic refresh setting example for FIN signal wait function is shown
below.
• CPU No. 1 (PLC CPU) (GX Developer)
Set the device transmitted to CPU No.2 (M3200 to M3295)
• CPU No. 2 (Motion CPU) (MT Developer)
Set the device received from CPU No.1 (M3200 to M3295)
Set the device received from CPU No.2 (M2400 to M2495) Set the device transmitted to CPU No.1 (M2400 to M2495)
Multiple CPU high speed refresh setting (MT Developer only)