Instruction manual

4 - 1
4 PARAMETERS FOR POSITIONING CONTROL
4
4. PARAMETERS FOR POSITIONING CONTROL
4.1 System Settings
In the Multiple CPU system, the common system parameters and individual
parameters are set for each CPU and written to each CPU.
(1) The base settings, Multiple CPU settings and Motion slot settings are set in the
common system parameter setting.
(2) The system basic setting, self CPU installation position setting, servo amplifier
setting, high-speed read setting and optional data monitor setting are set in the
individual parameter setting.
(3) The data setting and correction can be performed in dialog form using
MT Developer.
(Refer to the "Q173DCPU/Q172DCPU Motion Controller Programming
Manual
(COMMON)
" for details of the setting contents.)