Motors Air Conditioning Control System Operating Manual

1.4.5.1 Online Connection

(1) Clicking “Online Connection (Wide area access mode)”on the

section screen of Monitor mode.

Last click " ."

(2) The customer registration screen will be displayed.

[1] -> [2] -> [3] hierarchically.

[1] Area name

[2] Customer name

[3] Air conditioning system name

& connection method

(a) Creating the [Area name] folder

1) When [Wide Area] is being focussed, the

sub-menu will be displayed by right-clicking.

2) Select [Create Area …].

3) As the screen to enter the AREA name appears,

set a proper Area name and press [OK] to

create the Area folder.

(b) Creating the [Customer name] folder

1) Right-clicking the [Area name folder] to be

registered displays the sub-menu.

2) Select [Create Custormer …].

3) As the screen to enter the Customer name

appears, set a proper customer name.

* In addition to the above mouse operation, the creation of [AREA name] and [Customer name] can be

set from the menu bar (File)

or tool bar (Figure).

By applying the same operation procedure(right-clicking, menu bar, tool bar), each folder can be

deleted. Also the name of each folder can be changed.

Caution :

If a folder is deleted, all information (customer name, air conditioning system name, etc.) will be

deleted similarly.