Specifications

7-2-5. H/W information (Switch types and display contents)

100’s digit 10’s digit

1’s digit

Fixed SW102 SW101

Dip switches (Function selection)

(SW103)

M-NET address switches

LED: Lit when energized/

Blinks during error

Note

● Refer to section 7-2-6 for function setting with Dip SW103.

● Only the 10’s and the 1’s digits need to be set to set the addresses. (The 100’s digit is fixed to 2.)

● Set the address switches to values between 201 and 250. (The 100’s digit is fixed to 2.) All values from 251 and up will

be treated as 250.

● The factory setting for the address switches is 200. Do not leave it to 200, or the controller will not be able to display AHC

status.