Specifications

20
7-2-2. Installation method
AHC must be installed inside the metal control box.
Either the supplied L-fittings or DIN rail attachment can be used for the installation.
Leave adequate space between ALPHA2 and AHC ADAPTER as shown in the figure below so as not to strain the cables.
* Secure the cable that connects ALPHA2 and AHC ADAPTER in place with the supplied cable tie regardless of whether
L-fittings or DIN rails are used. (Fig. 7-1 and Fig. 7-2)
Unit: mm (in)
Fig. 7-1 Fig. 7-2
116.00 [4-1/2]
90.00 [3-1/2]
116.00 [4-1/2]
90.00 [3-1/2]