Specifications

19
7-2-1. Field-supplied items
The following items are required to install AHC ADAPTER.
* Two types of installation options (A and B in the table below) are available for AHC ADAPTER. Select the one that is best
suited for a given environment.
Field-supplied items Specifications
A
Unit fixing screw
(required when using L-fittings)
M4 x 2 pcs.
B
DIN rail and fixing screw
(required when using DIN rails)
DIN rail width: 35 mm (1-13/32 in)
Applicable type (IEC 60715/DIN 60715): TH35-7.5Fe, TH35-7.5Al
Functional ground wire
* Use a wire with an appropriate diameter so that the wire can be fixed with the
cable strap below the terminal block. A diameter of 10 mm is recommended.
Sleeved ring terminal
M3.5 ring terminal (for M-NET transmission cables (A, B, S))
M4 ring terminal (for functional ground wire)
Transmission cable
Type: Sheathed vinyl cable
● CVVS Min. 1.25 mm² (Min. AWG 16)
* CPEVS: PE
*1
insulated PVC
*1
jacketed shielded communication cable
* CVVS: PVC
*1
insulated PVC
*1
jacketed shielded control cable
* Use cables with an appropriate diameter so that the cables can be fixed with the
cable strap below the terminal block. A diameter of 10 mm is recommended.
*1 PE: Polyethylene; PVC: Polyvinyl chloride