Specifications

18
7-2. Installation
4
On-site installation of AHC
To prevent injury, install AHC on a flat surface strong
enough to support its weight.
To reduce the risk of shorting, current leakage, electric
shock, malfunctions, smoke, or fire, do not install AHC in a
place exposed to water or in a condensing environment.
To reduce the risk of electric shock, malfunctions, or fire,
seal the gap between the cable access holes with putty.
Do not install AHC on the panel door of the metal control box.
Vibrations or shocks to the controller may damage AHC or cause
AHC to fall.
IMPORTANT
● Leave the AL2-CAB BOARD (Fig. 5-1) wrapped in bubble wrap until after AHC ADAPTER has been installed in the
metal control box.