Specifications

15
6. System configuration
The figure below only shows the transmission cable connections. Power cables are omitted.
TB7TB3
TB7TB3
[051]
[056] [057]
[001] [002]
[201]
[101]
[006] [007] [008] [009]
[106]
M-NET
[003] [004] [005]
[103]
M-NET
M-NET
[000]
Power supply unit
PAC-SC51KUA
(optional)
Power (24 VDC)
Centralized
controller
LAN
Outdoor unit
Outdoor unit
BC controller
Group 1 Group 2
Group 3
Indoor unit
Remote controller
M-NET transmission cable
Numbers in the parentheses indicate
address numbers.
AHC
RC
RC
RC
RC
AHC
ALPHA2
AHC
ADAPTER
ALPHA2
AHC ADAPTER
Fig. 6-1
AHC
Units to which power is supplied
(e.g., indoor units, remote controllers, AHC)
Outdoor units that
supply power
* AHC ADAPTER requires either an outdoor unit or a power supply device as a power source.
* The power consumption coefficient of AHC ADAPTER (PAC-IF01AHC-J) is "0.5."
If the total power supply that the units such as indoor units, remote controllers, and AHC require exceeds the outdoor unit's ability to supply power, a
Transmission booster (PAC-SF46EPA) will be required.
Outdoor unit Transmission booster Indoor unit
Remote Controller
(PAR-U01MEDU, PAR-U02MEDA)
AHC ADAPTER
32 25 1
*1
0.5 0.5
*1 "7" for P200 and P250 models