Operation Manual

Change the Route
63
NAVI Route Checking and Changing
Select from Four Routes
You can simultaneously search for routes with
four different conditions, then select one of
them.
ADVICE
• Depending on the road conditions, it
may not be possible to search for all four
routes.
1
On the itinerary list screen,
touch
Show Route
and
4Routes
.
2
Touch the “search condition”
to set.
The search conditions are the same as for
“Route Options”(P201) “Route Priority”.
▼
This displays the route with the changed
search conditions.
Search for a Detour Route
You can search for a route that detours ahead
the distance you specify.
ADVICE
• This operation is not possible if the distance
to the destination is less than 1 km.
1
Press the
NAVI MENU
key.
This displays the navi menu.
2
Touch
Route Menu
, and then
Detour
.
3
Touch the “distance” to detour.
If you touched [Avoid Street], refer to
“Selecting a detouring road”(P63) .
▼
The search for the route detouring the set
distance is complete and route guidance
starts.
NOTE
• You can change the distance unit with
[System] [Units].
→“System Settings”(P208)
Selecting a detouring road
Select the street that will be the starting point
and the street that will be the ending point,
then set a route that detours that range.
1
Execute up to Step 2 in “Search
for a Detour Route”(P63) .
2
Touch
Avoid Street
.
3
Touch the “street” you want to
set to the starting point.
If you are detouring only one street,
proceed to Step 5.
4
Touch the “street” you want to
set to the ending point.
5
Touch
Set
.
▼
The search for the route detouring the
set range of streets is complete and route
guidance starts.